Fortinet New 2023 NSE7_OTS-6.4 Sample Questions Reliable NSE7_OTS-6.4 Test Engine
Feel Fortinet NSE7_OTS-6.4 Dumps PDF Will likely be The best Option
Fortinet NSE7_OTS-6.4 Exam is an important certification for professionals who want to demonstrate their expertise in securing OT networks. NSE7_OTS-6.4 exam covers a wide range of topics related to OT security and is designed to test the candidate's ability to apply this knowledge to real-world scenarios. By obtaining this certification, professionals can enhance their career prospects and help their organizations to mitigate cyber threats.
NEW QUESTION # 15
Refer to the exhibit and analyze the output.
Which statement about the output is true?
- A. This is a sample of a FortiAnalyzer system interface event log.
- B. This is a sample of a PAM event type.
- C. This is a sample of FortiGate interface statistics.
- D. This is a sample of an SNMP temperature control event log.
Answer: A
NEW QUESTION # 16
As an OT administrator, it is important to understand how industrial protocols work in an OT network.
Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- B. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- C. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- D. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
Answer: A
NEW QUESTION # 17
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to forward only domain controller traffic.
- B. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
- C. FortiGate is configured with forward-domains to forward only company domain website traffic.
- D. FortiGate is configured with forward-domains to reduce unnecessary traffic.
Answer: D
NEW QUESTION # 18
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Deploy a FortiGate device within each ICS network.
- B. Use segmentation
- C. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- D. Configure firewall policies with industrial protocol sensors
- E. Configure firewall policies with web filter to protect the different ICS networks.
Answer: C,D,E
NEW QUESTION # 19
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for network micro-segmentation.
- B. It can be used for IoT device detection.
- C. It can be used for industrial intrusion detection and prevention.
- D. It can be used for device profiling.
Answer: A,D
NEW QUESTION # 20
When device profiling rules are enabled, which devices connected on the network are evaluated by the device profiling rules?
- A. All connected devices, each time they connect
- B. Known trusted devices, each time they change location
- C. Rogue devices, each time they connect
- D. Rogue devices, only when they connect for the first time
Answer: D
NEW QUESTION # 21
An OT network administrator is trying to implement active authentication.
Which two methods should the administrator use to achieve this? (Choose two.)
- A. Two-factor authentication on FortiAuthenticator
- B. Role-based authentication on FortiNAC
- C. FSSO authentication on FortiGate
- D. Local authentication on FortiGate
Answer: A,D
NEW QUESTION # 22
An administrator wants to use FortiSoC and SOAR features on a FortiAnalyzer device to detect and block any unauthorized access to FortiGate devices in an OT network.
Which two statements about FortiSoC and SOAR features on FortiAnalyzer are true? (Choose two.)
- A. You cannot use Windows and Linux hosts security events with FortiSoC.
- B. You can automate SOC tasks through playbooks.
- C. You must set correct operator in event handler to trigger an event.
- D. Each playbook can include multiple triggers.
Answer: B,C
Explanation:
Ref: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/268882/fortisoc
NEW QUESTION # 23
Refer to the exhibit.
Given the configurations on the FortiGate, which statement is true?
- A. FortiGate is configured with forward-domains to forward only domain controller traffic.
- B. FortiGate is configured with forward-domains to filter and drop non-domain controller traffic.
- C. FortiGate is configured with forward-domains to forward only company domain website traffic.
- D. FortiGate is configured with forward-domains to reduce unnecessary traffic.
Answer: D
NEW QUESTION # 24
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. An administrator can create firewall policies in the switch to secure between PLCs.
- B. PLCs use IEEE802.1Q protocol to communicate each other.
- C. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
- D. There is no micro-segmentation in this topology.
Answer: D
NEW QUESTION # 25
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Deploy a FortiGate device within each ICS network.
- B. Use segmentation
- C. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- D. Configure firewall policies with industrial protocol sensors
- E. Configure firewall policies with web filter to protect the different ICS networks.
Answer: C,D,E
NEW QUESTION # 26
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)? (Choose three.)
- A. FortiManager
- B. FortiSIEM
- C. FortiAnalyzer
- D. FortiGate
- E. FortiNAC
Answer: B,D,E
Explanation:
1. FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
2. FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
3. FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
Reference:
Fortinet NSE 7 - OT Security 6.4 Study Guide, Chapter 4: OT Security Devices, page 4-20.
NEW QUESTION # 27
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- B. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- C. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
- D. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
Answer: C
NEW QUESTION # 28
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. TACACS
- B. RADIUS
- C. ICMP
- D. API
- E. SNMP
Answer: B,D,E
NEW QUESTION # 29
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- B. IT and OT networks are separated by segmentation.
- C. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- D. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
Answer: A,B
NEW QUESTION # 30
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must use a third-party RADIUS OTP server.
- B. You must register the same FortiToken on more than one FortiGate.
- C. You must use a FortiAuthenticator.
- D. You must use the user self-registration server.
Answer: C
NEW QUESTION # 31
An OT architect has deployed a Layer 2 switch in the OT network at Level 1 the Purdue model-process control. The purpose of the Layer 2 switch is to segment traffic between PLC1 and PLC2 with two VLANs. All the traffic between PLC1 and PLC2 must first flow through the Layer 2 switch and then through the FortiGate device in the Level 2 supervisory control network.
What statement about the traffic between PLC1 and PLC2 is true?
- A. The Layer 2 switch rewrites VLAN tags before sending traffic to the FortiGate device.
- B. In order to communicate, PLC1 must be in the same VLAN as PLC2.
- C. PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
- D. The Layer 2 switches routes any traffic to the FortiGate device through an Ethernet link.
Answer: C
Explanation:
The statement that is true about the traffic between PLC1 and PLC2 is that PLC1 and PLC2 traffic must flow through the Layer-2 switch trunk link to the FortiGate device.
NEW QUESTION # 32
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Host or user group memberships
- B. Host or user attributes
- C. Administrative group membership
- D. An existing access control policy
- E. Location
Answer: A,B,E
Explanation:
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 33
Refer to the exhibit.
An OT administrator ran a report to identify device inventory in an OT network.
Based on the report results, which report was run?
- A. A FortiSIEM analytics report
- B. A FortiSIEM CMDB report
- C. A FortiSIEM incident report
- D. A FortiAnalyzer device report
Answer: B
NEW QUESTION # 34
......
Use Valid New NSE7_OTS-6.4 Test Notes & NSE7_OTS-6.4 Valid Exam Guide: https://www.actualcollection.com/NSE7_OTS-6.4-exam-questions.html