2025 Provide Updated VMware 2V0-17.25 Dumps as Practice Test and PDF
2V0-17.25 Dumps are Available for Instant Access
VMware 2V0-17.25 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 26
An organization has experienced performance issues and requires a detailed analysis of infrastructure performance, capacity, utilization, and compliance using VMware Aria components.
What three steps should be followed to generate and analyze these reports? (Choose three.)
- A. Use Aria Operations for Logs to correlate log data with performance
- B. Run predefined reports on capacity and utilization
- C. Create custom dashboards to monitor performance metrics
- D. Access Aria Operations and navigate to the Reports section
- E. Export the reports for further analysis and compliance verification
Answer: A,B,C
Explanation:
Creating custom dashboards in Aria Operations allows administrators to visualize and monitor performance metrics specific to the organization's needs, making it easier to analyze the infrastructure.
Using Aria Operations for Logs helps correlate log data with performance issues, enabling a deeper analysis and understanding of the root causes of performance problems.
Running predefined reports on capacity and utilization provides valuable insights into how resources are being consumed, helping identify areas that need optimization or adjustment.
NEW QUESTION # 27
The administrator of a VMware Cloud Foundation environment notices that log data from multiple components, including vSphere, NSX, and vSAN, is not being collected in Aria Operations for Logs.
What two steps should the administrator perform to resolve this issue? (Choose two.)
- A. Increase the storage capacity of the Aria Operations for Logs server to accommodate more log data.
- B. Reconfigure the log level settings on all vSphere components to ensure detailed logging.
- C. Verify that the Aria Operations for Logs license is still valid and active.
- D. Ensure that the syslog configuration on each component is pointing to the correct Aria Operations for Logs server.
- E. Check the network connectivity between the Aria Operations for Logs server and the VMware Cloud Foundation components.
Answer: D,E
Explanation:
If Aria Operations for Logs cannot reach the vSphere, NSX, or vSAN components over the network, no logs will be collected-so validating connectivity (firewalls, routing, DNS) is essential.
Each component's syslog settings must point to the correct Aria Operations for Logs endpoint; if they're misconfigured, logs won't be forwarded.
NEW QUESTION # 28
An administrator has been tasked with providing audit information from VMware Cloud Foundation (VCF) such as logins and configuration changes in VCF Operations. What must be configured to provide the required information?
- A. Enable Event logs in every vCenter server.
- B. Enable Audit Events.
- C. Integrate VCF Operations for Logs.
- D. Configure Audit logs for every VCF instance.
Answer: C
Explanation:
The VCF 9.0 Logging and Auditing Guide explains that audit information--including user logins, configuration changes, and API requests--is collected and made searchable through VCF Operations for Logs.
VCF Operations for Logs provides centralized log aggregation and auditing for all VCF services, including audit trails of logins and configuration changes.
NEW QUESTION # 29
An administrator must replace a component's certificate in VCF with an external CA-signed certificate. What format must be used when creating the certificate?
- A. PFX
- B. DER
- C. PEM
- D. P7B
Answer: C
Explanation:
The VCF 9.0 Security and Certificates Guide states: "VCF supports only certificates in PEM format when replacing system component certificates with those signed by an external Certificate Authority." PEM is the standard Base64 format with .crt and .key files. PFX (PKCS#12) is used for Windows stores but not supported in VCF automation. P7B is for certificate chains, while DER is binary encoding. Thus, the required format for certificates in VCF is PEM.
NEW QUESTION # 30
DRAG DROP
Match each vSphere HA host state issue with its troubleshooting step.
Answer:
Explanation:
NEW QUESTION # 31
An administrator has been tasked with showing the average health of all virtual machines (VMs) in a VMware Cloud Foundation (VCF) fleet.
The following information has been provided:
All clusters are connected to the same VCF Operations instance.
The Virtual Machines in scope are located across different clusters in the same VCF instance.
What should the administrator create to meet the stated objective?
- A. A super metric
- B. An alert
- C. A symptom
- D. A dashboard
Answer: A
Explanation:
The VCF 9.0 Operations Guide - Metrics and Super Metrics explains that super metrics are used when administrators need to aggregate or compute new values from existing metrics. Super metrics can be applied across multiple objects, such as aggregating the health score of all VMs in a fleet.
The documentation states:
"A super metric is a user-defined formula that calculates a value derived from one or more existing metrics. Super metrics can be applied across objects to provide aggregate insights such as averages or totals." Dashboard (A): Dashboards can display metrics but cannot compute new aggregated values on their own.
Symptom (C): Used to define conditions that trigger alerts, not to compute average health values.
Alert (D): Alerts notify administrators of issues but do not calculate averages across many VMs.
Therefore, to display the average health score of all VMs across multiple clusters, the administrator must create a super metric and then visualize it in a dashboard.
NEW QUESTION # 32
An administrator is tasked to configure network connectivity to the organization's corporate network for their container workloads to be deployed on VMware Kubernetes Service (VKS) clusters backed by VMware NSX networking on a new VMware Cloud Foundation (VCF) deployment. Which gateway connectivity type should the administrator deploy?
- A. Round-robin Connectivity
- B. Centralized Connectivity
- C. Physical Connectivity
- D. Distributed Connectivity
Answer: B
Explanation:
The VMware Cloud Foundation 9.0 networking design documentation specifies that container workloads running on VMware Kubernetes Service (VKS) with NSX networking require external connectivity via a Centralized Connectivity model. This is implemented using an NSX Tier-0 (T0) Gateway which provides north-south routing to the corporate physical network.
The guide states: "In VKS deployments backed by NSX networking, workloads achieve external reachability through a centralized Tier-0 Gateway, ensuring integration with corporate networking and enterprise services." This model ensures traffic consolidation, policy enforcement, and simplified routing for Kubernetes workloads.
Round-robin Connectivity is not a supported NSX gateway connectivity model.
Distributed Connectivity refers to east-west NSX overlay communication, not north-south connectivity.
Physical Connectivity is not precise, as workloads do not connect directly to the physical network; instead, they use logical routing.
Centralized Connectivity is the correct model, where the T0 Gateway centralizes external routing for container workloads.
Reference:
.
NEW QUESTION # 33
An Administrator is configuring the network within their VCF management domain in preparation to deploy VMware Aria Suite Lifecycle.
What are the two types of virtual networks that the Administrator could configure to support the deployment? (Choose two.)
- A. Overlay-backed NSX Segments
- B. VLAN-backed Port Groups
- C. VLAN-backed NSX Segments
- D. VXLAN-backed Network Pools
Answer: A,B
Explanation:
VLAN-backed Port Groups are used in traditional network environments where VLANs are configured on the physical switches. These port groups can be configured in the management domain to support network connectivity.
Overlay-backed NSX Segments use NSX to create virtual networks overlaid on existing physical networks, which is essential for network virtualization and communication between virtual machines, especially in a VMware Cloud Foundation environment.
NEW QUESTION # 34
An organization is looking to streamline its IT service delivery by automating the deployment of applications and infrastructure across its hybrid cloud environment.
Which VMware Aria Suite component should they use?
- A. Aria Operations for Logs
- B. Aria Automation
- C. Aria Operations
- D. Aria Operations for Networks
Answer: B
Explanation:
Aria Automation (formerly vRealize Automation) is designed to automate the deployment of applications and infrastructure across hybrid cloud environments. It enables the provisioning, management, and orchestration of IT services, helping organizations streamline their service delivery.
NEW QUESTION # 35
An administrator needs to configure an ESXi host and create a host profile to ensure consistent configuration across multiple hosts in a cluster.
Which three steps are necessary to achieve this? (Choose three.)
- A. Extract the host profile from the configured reference host.
- B. Configure the desired settings on a reference ESXi host.
- C. Manually configure each host to match the reference host settings.
- D. Remediate the non-compliant hosts to ensure they match the host profile.
- E. Apply the host profile to all hosts in the cluster.
Answer: A,B,D
Explanation:
First, configure the desired settings on a reference ESXi host. This host will be used as the template for creating a consistent configuration across the cluster.
After configuring the reference host, extract the host profile from it. This captures the configuration of the reference host as a host profile.
Remediation is necessary to ensure that other hosts in the cluster align with the reference host's configuration. The host profile can be applied, and remediation will correct any non-compliant settings on other hosts.
NEW QUESTION # 36
Which vSphere feature reduces the time required to patch and update multiple ESXi hosts in a cluster by using a centralized repository and automated workflows?
- A. Enhanced vMotion Compatibility (EVC)
- B. vSphere Lifecycle Manager (vLCM)
- C. vSAN Health Service
- D. Host Profiles
Answer: B
Explanation:
vSphere Lifecycle Manager allows administrators to centrally manage ESXi images and automate patching tasks across multiple hosts, streamlining updates while minimizing manual intervention.
NEW QUESTION # 37
A newly added ESXi host is not able to communicate with the vCenter Server.
What three steps should an administrator take to diagnose and resolve this issue? (Choose three.)
- A. Verify the network configuration on the ESXi host
- B. Restart the manaqement aqents on the ESXi host
- C. Ensure that the management network is correctly configured and reachable
- D. Use the vSphere Client to review the host's network settings
- E. Check the license on the ESXi host
Answer: A,B,C
Explanation:
Verifying the network configuration on the ESXi host ensures that the host is correctly configured for network communication with the vCenter Server.
The management network must be properly configured and reachable from the ESXi host to communicate with the vCenter Server.
Restarting the management agents on the ESXi host can resolve issues related to communication between the ESXi host and vCenter Server, as sometimes the agents might become unresponsive.
NEW QUESTION # 38
An administrator is preparing to deploy a new VMware Cloud Foundation (VCF) fleet to an environment that does not have Internet access. Which two binaries must be uploaded to the VCF Installer appliance before initiating the deployment? (Choose two.)
- A. Lifecycle Manager
- B. VCF Operations
- C. Identity Broker
- D. ESX
- E. NSX
Answer: B,E
Explanation:
In VCF 9.x, air-gapped bring-up requires staging the required binaries in the VCF Installer. The documented list explicitly includes NSX and VCF Operations among the components to upload. The product guide states: "VMware Cloud Foundation required binaries include... NSX ... VMware Cloud Foundation Operations ... vCenter ... SDDC Manager..." (exact list excerpt). This list does not call for ESX images or the legacy "Lifecycle Manager." Therefore, from the given options the two binaries that must be uploaded are NSX and VCF Operations. ESX is pre-imaged on hosts per preparation guidance and is not a required VCF Installer binary; "Lifecycle Manager" is not used in VCF 9.0 bring-up.
NEW QUESTION # 39
An administrator is troubleshooting a high CPU usage issue in a VMware Cloud Foundation environment running IaaS Control Plane. Several namespaces are reporting degraded performance.
What two steps should the administrator take to diagnose and potentially resolve the issue? (Choose two.)
- A. Reboot the supervisor cluster to clear any temporary issues.
- B. Upgrade the vSphere version to the latest release.
- C. Check the resource limits and reservations set on the Kubernetes namespaces.
- D. Review the CPU usage of the ESXi hosts to identify any that are overcommitted.
- E. Reconfigure the DRS settings to be more aggressive in load balancing.
Answer: C,D
Explanation:
The administrator should review the CPU usage of the ESXi hosts to identify if any hosts are overcommitted. Overcommitted hosts can lead to performance degradation across workloads.
Checking the resource limits and reservations on Kubernetes namespaces is crucial. If the resource limits are too low or improperly configured, it could cause degraded performance for workloads running in those namespaces.
NEW QUESTION # 40
During the deployment of a VI workload domain using SDDC Manager, an administrator encounters issues with host configuration.
Which three steps should be followed to troubleshoot and resolve the configuration issues? (Choose three.)
- A. Reconfigure the NSX Edge nodes.
- B. Check the compatibility of the hardware with VMware Cloud Foundation requirements.
- C. Ensure that all ESXi hosts have the correct version of ESXi installed.
- D. Restart the SDDC Manager appliance to reset configurations.
- E. Verify that all ESXi hosts are connected to the management network.
Answer: B,C,E
Explanation:
Verifying hardware compatibility with VMware Cloud Foundation requirements is essential. If the hardware is not compatible, configuration issues can arise during deployment.
Ensuring that the ESXi hosts have the correct version installed is crucial because mismatched versions can lead to configuration failures.
Verifying that all ESXi hosts are connected to the management network is important because connectivity issues between hosts and management components can prevent proper configuration during deployment.
NEW QUESTION # 41
Which statement describes Harbor?
- A. Harbor is an image scanner used to verify that images are free from vulnerabilities and patches.
- B. Harbor is an open source registry that secures artifacts with policies and RBAC, scans images for vulnerabilities, and signs images as trusted.
- C. Harbor requires all images be pulled from GitHub for validation.
- D. Harbor, formerly known as Bitnami, is an image catalog for downloading verified open-source packages.
Answer: B
Explanation:
Harbor is an open source registry that secures artifacts with policies and role-based access control, ensures images are scanned and free from vulnerabilities, and signs images as trusted.
NEW QUESTION # 42
A vCenter Server is showing high CPU usage due to large inventory and frequent tasks.
Which approach can alleviate performance issues?
- A. Disable DRS and HA on all clusters
- B. Remove all resource pools from the environment
- C. Create additional vCenter Servers with Enhanced Linked Mode
- D. Increase vCenter resource allocation or place it on a faster datastore
Answer: D
Explanation:
vCenter might need additional CPU, memory, or faster storage. Disabling DRS/HA (A) or removing resource pools (C) undermines cluster functionality. While multiple vCenters (D) could help in extremely large environments, the more direct approach is usually allocating more resources or moving to faster storage.
NEW QUESTION # 43
An administrator is deploying an NSX Edge cluster from SDDC Manager. The administrator plans to configure the Border Gateway Protocol (BGP) to enable dynamic routing with the upstream physical networking.
Which three values must be provided when configuring BGP? (Choose three.)
- A. BGP Peer IP
- B. BGP Password
- C. BGP Autonomous System Number (ASN)
- D. BGP Route Topology
- E. BGP Router ID
Answer: A,C,E
Explanation:
The BGP Autonomous System Number (ASN) is a unique identifier that must be configured for BGP to define the routing domain.
The BGP Router ID is used to uniquely identify the BGP router in the network. The BGP Peer IP is required to establish a BGP peering relationship with an upstream router or another BGP- enabled device.
NEW QUESTION # 44
An administrator needs to deploy a Kubernetes cluster on a vSphere IaaS control plane (formerly vSphere with Tanzu) to host a new application.
Which three steps should be followed to successfully deploy the Kubernetes cluster? (Choose three.)
- A. , Deploy a vSphere Pod Service.
- B. Configure a Load Balancer for the Kubernetes control plane nodes.
- C. Enable Workload Management on the vSphere Cluster.
- D. Create a new VM template for the Kubernetes nodes.
- E. Configure a vSphere Namespace and assign resource quotas.
Answer: B,C,E
Explanation:
A Load Balancer is needed for the Kubernetes control plane nodes to distribute traffic across the control plane and ensure high availability for the Kubernetes management layer.
A vSphere Namespace must be configured to define a logical boundary for Kubernetes workloads, and resource quotas help ensure that resources are allocated appropriately for the workloads.
Enabling Workload Management on the vSphere Cluster is necessary to integrate Kubernetes with vSphere and manage the lifecycle of Kubernetes clusters using vSphere with Tanzu.
NEW QUESTION # 45
How do virtual machine (VM) storage policies in a VMware vSphere environment contribute to optimizing resource utilization, ensuring data availability, and meeting application-specific requirements?
- A. By regulating and optimizing storage traffic between virtual machines
- B. By streamlining the process of automating virtual machine backups
- C. By guaranteeing storage IOPs for a particular virtual machine
- D. By defining and enforcing storage requirements, such as performance, availability, and redundancy
Answer: D
Explanation:
VM storage policies let you specify requirements like performance tiers, redundancy levels, and availability SLA, and vSphere enforces these rules against underlying storage capability profiles to optimize resource usage and meet application needs.
NEW QUESTION # 46
An administrator has deployed a new VMware Cloud Builder appliance using the downloaded OVF file. While attempting to use the VMware Cloud Builder interface, the administrator discovers that no connection can be established to the appliance.
Which three configuration errors may have occurred? (Choose three.)
- A. Incorrect NTP settings or inaccessible NTP servers.
- B. Incorrect Dynamic IP configuration.
- C. BGP routing misconfiguration.
- D. Incorrect DNS settings or inaccessible DNS servers.
- E. VLAN misconfiguration.
- F. Incorrect Static IP configuration.
Answer: D,E,F
Explanation:
A VLAN misconfiguration could prevent proper network connectivity, particularly if the appliance is not in the correct VLAN or if there is a misalignment in network segmentation.
Incorrect DNS settings or inaccessible DNS servers can prevent the VMware Cloud Builder appliance from being able to resolve hostnames, leading to connection issues.
Incorrect Static IP configuration would result in the appliance being unreachable because it won't have the correct IP address or network configuration to communicate with other components.
NEW QUESTION # 47
An ESXi host is no longer compliant with the applied Host Profile after a reboot.
What is the best initial step to rectify the situation?
- A. Remediate the host against the Host Profile in vCenter
- B. Reset the host to factory defaults and reinstall ESXi
- C. Manually edit the host's /etc/vmware/esx.conf file
- D. Remove the host from the cluster and rejoin it
Answer: A
Explanation:
If a host becomes non-compliant, the first step is to remediate it via the Host Profile. This automates reapplying configurations. Manually editing config files or reinstalling ESXi are last-resort measures.
NEW QUESTION # 48
Which statement describes Harbor?
- A. Harbor is an image scanner used to verify that images are free from vulnerabilities and patches.
- B. Harbor is an open source registry that secures artifacts with policies and RBAC, scans images for vulnerabilities, and signs images as trusted.
- C. Harbor requires all images be pulled from GitHub for validation.
- D. Harbor, formerly known as Bitnami, is an image catalog for downloading verified open-source packages.
Answer: B
Explanation:
According to the VCF 9.0 Container Registry Documentation, Harbor is defined as:
"Harbor is an open source registry that secures artifacts with policies and role-based access control, ensures images are scanned and free from vulnerabilities, and signs images as trusted." This description aligns exactly with option A. Harbor is not Bitnami (B), though it integrates with open-source images. It includes vulnerability scanning but is not only an image scanner (C). It does not require GitHub as a source (D); Harbor can integrate with multiple registries.
Therefore, Harbor's primary role within VCF is to act as a secure image registry with RBAC, scanning, and signing capabilities.
NEW QUESTION # 49
......
Updated 2V0-17.25 Dumps Questions For VMware Exam: https://www.actualcollection.com/2V0-17.25-exam-questions.html
Valid 2V0-17.25 Dumps for Helping Passing 2V0-17.25 Exam!: https://drive.google.com/open?id=1iYzcGH8AYK1vTZxnciiz36iMwHR_yqX_