2022 Updated Verified Pass JN0-230 Exam - Real Questions & Answers
Dumps Moneyack Guarantee - JN0-230 Dumps Approved Dumps
How to book the JN0-362 Exam
These are following steps for registering the JN0-362 exam.
- Step 1: Visit to registration at Pearson exam
- Step 2: Signup/Login
- Step 3: Search for JN0-362 Exam Certifications Exam
- Step 4: Select Date, time and confirm with payment method
NEW QUESTION 43
Which two statements describe IPsec VPNs? (Choose two.)
- A. IPsec VPN traffic is always encrypted.
- B. IPsec VPNs use security measures to secure traffic over a public network between two remote sites.
- C. IPsec VPNs are dedicated physical connections between two private networks.
- D. IPsec VPN traffic is always authenticated.
Answer: B,D
NEW QUESTION 44
What is the behavior of an SRX series device when UDP and TCP is rejected by a security policy actions?
(choose two)
- A. The reject action drops UDP packets and sends an ICMP message to the source
- B. The reject actions drops TCP packets and sends an ICMP message to the source
- C. The reject action drops UDP packets and does not send ant message to the source
- D. The reject action drops TCP packets and send an RST message to the source.
Answer: A,D
NEW QUESTION 45
You have created a zone-based security policy that permits traffic to a specific webserver for the marketing team. Other groups in the company are not permitted to access the webserver. When marketing users attempt to access the server they are unable to do so.
What are two reasons for this access failure? (Choose two.)
- A. You failed to position the policy before the policy that denies access to the webserver.
- B. You failed to change the source zone to include any source zone.
- C. You failed to commit the policy change.
- D. You failed to position the policy after the policy that denies access to the webserver.
Answer: A,C
NEW QUESTION 46
Exhibit.
Which statement is correct regarding the interface configuration shown in the exhibit?
- A. The IP address is assigned to unit 0.
- B. The IP address has an invalid subnet mask.
- C. The interface is assigned to the trust zone by default.
- D. The interface MTU has been increased.
Answer: D
NEW QUESTION 47
What should you configure if you want to translate private source IP address to a single public IP address?
- A. Content filtering
- B. Destination NAT
- C. Security Director
- D. Source NAT
Answer: C
NEW QUESTION 48
What must you do first to use the Monitor/Events workspace in the j-Web interface?
- A. You must enable security logging that uses the TLS transport mode.
- B. You must enable security logging that uses the SD-Syslog format.
- C. You must enable stream mode security logging on the SRX Series device
- D. You must enable event mode security logging on the SRX Series device.
Answer: D
NEW QUESTION 49
Which statements is correct about global security policies?
- A. Global policies eliminate the need to assign interface to security zones.
- B. Global security require you to identify a source and destination zone.
- C. Global policies allow you to regulate traffic with addresses and applications, regardless of their security zones.
- D. Traffic matching global is not added to the session table.
Answer: C
NEW QUESTION 50
When configuring IPsec VPNs, setting a hash algorithm solves which security concern?
- A. Availability
- B. Encryption
- C. Integrity
- D. Redundancy
Answer: C
NEW QUESTION 51
Which two statements are correct about functional zones? (Choose two.)
- A. A functional zone uses security policies to enforce rules for transit traffic.
- B. Functional zones separate groups of users based on their function.
- C. A function is used for special purpose, such as management interface
- D. Traffic received on the management interface in the functional zone cannot transit out other interface.
Answer: C,D
NEW QUESTION 52
Which UTM feature should you use to protect users from visiting certain blacklisted websites?
- A. antispam
- B. Content filtering
- C. Web filtering
- D. Antivirus
Answer: D
NEW QUESTION 53
What must you do first to use the Monitor/Events workspace in the j-Web interface?
- A. You must enable event mode security logging on the SRX Series device.
- B. You must enable security logging that uses the TLS transport mode.
- C. You must enable stream mode security logging on the SRX Series device
- D. You must enable security logging that uses the SD-Syslog format.
Answer: D
NEW QUESTION 54
What is a characteristic of the Junos enhanced Web filtering solution ?
- A. The SRX series device intercepts HTTP and HTTPS request and send the source IP address to the on-premises Websense server
- B. The Websense cloud categorize the URLs and also provide site reputation information.
- C. Junos Enhanced Web filtering allows the SRX series device to categorize URLs using an on-premises websense server.
- D. The Websense cloud resolves the categorized URLs to IP addresses by performing a DNS reverse loockup
Answer: C
NEW QUESTION 55
Which security feature is applied to traffic on an SRX Series device when the device is running n packet mode?
- A. Sky ATP
- B. Unified policies
- C. ALGs
- D. Firewall filters
Answer: D
NEW QUESTION 56
Which two statements are true about security policies in the factory-default configuration of an SRX340?
(Choose two.)
- A. All interzone traffic is allowed.
- B. All interzone traffic is denied.
- C. All traffic from the trust zone to the untrust zone is allowed.
- D. All traffic from the untrust zone to the trust zone is denied.
Answer: C,D
NEW QUESTION 57
What are two characteristic of static NAT SRX Series devices? (Choose two.)
- A. Static rules cannot coexist with destination NAT rules on the same SRX Series device configuration.
- B. Source and destination NAT rules take precedence over static NAT rules.
- C. A reverse mapping rule is automatically created for the source translation.
- D. Static NAT rule take precedence over source and destination NAT rules.
Answer: A,D
NEW QUESTION 58
You want to integrate an SRX Series device with SKY ATP.
What is the first action to accomplish task?
- A. Create the SSL VPN tunnel between the SRX Series device and Sky ATP.
- B. Copy the operational script from the Sky ATP Web UI.
- C. Issue the commit script to register the SRX Series device.
- D. Create an account with the Sky ATP Web UI.
Answer: D
NEW QUESTION 59
Which two segments describes IPsec VPNs? (Choose two.)
- A. IPsec VPN traffic is always authenticated.
- B. IPsec VPN traffic is always encrypted.
- C. IPsec VPNs use security to secure traffic over a public network between two remote sites.
- D. IPsec VPNs are dedicated physical connections between two private networks.
Answer: C
NEW QUESTION 60
Users in your network are downloading files with file extensions that you consider to be unsafe for your network. You must prevent files with specific file extensions from entering your network.
Which UTM feature should be enabled on an SRX Series device to accomplish this task?
- A. URL filtering
- B. antispam
- C. Web filtering
- D. content filtering
Answer: D
NEW QUESTION 61
Which method do VPNs use to prevent outside parties from viewing packet in clear text?
- A. Integrity
- B. NAT_T
- C. Authentication
- D. Encryption
Answer: D
NEW QUESTION 62
Which statements is correct about Junos security zones?
- A. User-defined security must contains the key word ''zone''
- B. Security policies are referenced within a user-defined security zone.
- C. User-defined security must contain at least one interface.
- D. Logical interface are added to user defined security zones
Answer: D
NEW QUESTION 63
Which two feature on the SRX Series device are common across all Junos devices? (Choose two.)
- A. UTM services
- B. screens
- C. Stateless firewall filters
- D. The separation of control and forwarding planes
Answer: C,D
NEW QUESTION 64
Which two statements are true about security policy actions? (Choose two.)
- A. The deny action silently drop the traffic.
- B. The reject action silently drops the traffic.
- C. The reject action drops the traffic and sends a message to the source device.
- D. The deny action drops the traffic and sends a message to the source device.
Answer: A
NEW QUESTION 65
......
What is the duration of the JN0-362 Exam
- Number of Questions: 65
- Format: Multiple choices, multiple answers
- Passing Score: 60%
- Length of Examination: 90 minutes
Updated PDF (New 2022) Actual Juniper JN0-230 Exam Questions: https://www.actualcollection.com/JN0-230-exam-questions.html