A fully updated 2024 NACE-CIP1-001 Exam Dumps exam guide from training expert ActualCollection
Provides complete coverage of every objective on exam and exam preparation NACE-CIP1-001
The Coating Inspector Level 1 certification exam is intended for professionals who are involved in the inspection and evaluation of coatings. Individuals who are interested in pursuing a career in the coating inspection industry or those who wish to demonstrate their expertise in this field can benefit from the NACE-CIP1-001 certification. Coating Inspector Level 1 certification is recognized by employers and clients around the world and can help professionals advance their careers and increase their earning potential.
NACE-CIP1-001 certification exam is a globally recognized program that certifies individuals as coating inspectors. NACE-CIP1-001 exam is conducted by the National Association of Corrosion Engineers (NACE), which is the world’s leading organization that aims to prevent corrosion and protect the environment. Coating Inspector Level 1 certification program is designed to assess the knowledge and skills of individuals in the field of coating inspection and provide them with the necessary credentials to advance their careers.
NEW QUESTION # 26
Safety Data Sheets must be carefully reviewed by:
- A. The Owner's personnel
- B. The Application personnel
- C. All personnel involved in the job
- D. The Inspection personnel
Answer: C
NEW QUESTION # 27
Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
- A. Rotating the dial too fast when taking measurements
- B. Taking measurements too far from the edge of a surface
- C. Measuring ditty, tacky, or soft films
- D. Failing to determine the base metal reading (BMR)
Answer: A,C,D
NEW QUESTION # 28
Galvanic corrosion occurs on which of the following substrates:
- A. Wood
- B. Metal
- C. Concrete
- D. Fiberglass Reinforced Plastic
Answer: B
NEW QUESTION # 29
Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners' representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Gather data and attempt to meet with the owner's representative in advance of the pre-job conference
- B. Default to the owner's Inspection and Test Plan
- C. Meet separately with the coating manufactures' representative and coating application company in advance of the pre-job conference
- D. Bring the matter up at the pre-job conference
Answer: D
NEW QUESTION # 30
Stripe coats are generally applied to:
- A. Edges and corners
- B. Welds
- C. a), b), and c)
- D. Complex geometric shapes
Answer: C
NEW QUESTION # 31
Surface profile describes:
- A. The level of surface roughness required after abrasive blasting
- B. The initial condition of the surface prior to abrasive blasting
- C. The general condition of the surface required after abrasive blasting
- D. The level of surface cleanliness required after abrasive blasting
Answer: A
NEW QUESTION # 32
An inspectors personal log book should contain:
- A. Objective comments regarding the application work
- B. The inspector's personal opinions of the application team
- C. Subjective comments re ding the application team
- D. No comments regarding the application team
Answer: D
NEW QUESTION # 33
Most industrial coatings are:
- A. Organic
- B. Resistant to temperatures above 200C
- C. Inorganic
- D. Resistant to concentrated sulfuric acid
Answer: A
NEW QUESTION # 34
Solvents are added to coating formulations to
- A. decrease film permeability.
- B. provide color.
- C. dissolve binders and form liquid coatings.
- D. increase film permeability.
Answer: C
NEW QUESTION # 35
The Inspector should record the serial numbers of inspection instruments:
- A. Only if the specification requires it
- B. Each time the instrument is used
- C. Only when verifying accuracy of the instrument
- D. Only if the instrument is suspected of not working properly
Answer: B
NEW QUESTION # 36
According to SSPC PA 2 a Spot Measurement is:
- A. The average of gauge readings taken in a 4cm (1.5 inch) circle
- B. The average of all spot measurements in a given area
- C. A single gauge reading
- D. The overall average of all readings
Answer: A
NEW QUESTION # 37
How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 38
Inspection documentation is important because:
- A. Owners use the documentation for a variety of purposes
- B. a) & b)
- C. a) only
- D. It is the only deliverable item provided by the inspector
Answer: A
NEW QUESTION # 39
To be of value the Inspector's documentation must be:
- A. Always typewritten
- B. Always handwritten
- C. Timely, accurate and concise
- D. Submitted before the end of the job
Answer: C
NEW QUESTION # 40
SSPC SP 1 identifies the use of:
- A. Biodegradable detergents
- B. Inorganic solvents
- C. Organic solvents
- D. A wide variety of materials
Answer: D
NEW QUESTION # 41
Prior to using Inspection Tools the inspector must:
- A. Be trained on how to use the instrument
- B. a), b) & c)
- C. Read the manufactures' instructions
- D. Ensure the instrument is within calibration parameters
Answer: B
NEW QUESTION # 42
Non Conformance Reports are completed by the Inspector:
- A. In every instance that an item does not meet the specification requirements
- B. When the Inspector and Contractor deem it to be a significant non-conforming item
- C. When the Inspector deems it to be a significant non-conforming item
- D. In accordance with the specification's definition of a non-conformance
Answer: B
NEW QUESTION # 43
Which is a component that supplies most of the features and functions of the material?
- A. additive
- B. binder
- C. solvent
- D. pigment
Answer: B
NEW QUESTION # 44
You are the NACE Coating Inspector on an exterior job where the contractor is not using any environmental controls, For the last several hours your reading; indicate the relative humidity is rising and the substrate temperature is dropping. The sky is clouding over and the weather forecast is for evening showers. It is now 4 PM, your readings indicate you have minimally acceptable environmental conditions, however if the current trend continues, you expect to be outside specified conditions soon. The contractor advises you he is going to mix up the next full kit to complete his for the day.
Your FIRST preformed course of action is to:
- A. Advise the Contractor of your readings
- B. Call your supervisor
- C. Advise the Contractor he cannot proceed
- D. Advise the Contractor he can proceed
Answer: A
NEW QUESTION # 45
On a blast-cleaned surface, Ian ultraviolet light is generally used to detect
- A. soluble chemical salts
- B. inhibitor residues
- C. grease and oil
- D. sulfates
Answer: C
NEW QUESTION # 46
Check abrasive blast pressure with a
- A. replica tape
- B. surface comparator
- C. needle pressure gauge
- D. nozzle aperature gauge
Answer: C
NEW QUESTION # 47
Corrosion generally occurs at which of the following sites:
- A. Anode
- B. Cathode
- C. Electrolyte
- D. Metallic pathway
Answer: A
NEW QUESTION # 48
The initial steel condition is important to the NACE Inspector because:
- A. If the steel is pitted more coating will be required
- B. Less abrasive is need if the mill Scale s gone
- C. The Inspector may have to reject the Steel
- D. It affects the final appearance after blasting
Answer: C
NEW QUESTION # 49
When working as a NACE Inspector in a situation where there is a difference of opinion, the Inspector needs to:
- A. Never change his/her mind
- B. Achieve consensus through negotiation
- C. Go with the majority opinion
- D. Call the supervisor
Answer: D
NEW QUESTION # 50
When using a sling physchrometer a very large difference between the wet and dry bulb readings indicates:
- A. High Relative Humidity
- B. Low Surface Temperature
- C. Low Relative Humidity
- D. High Surface Temperature
Answer: C
NEW QUESTION # 51
......
NACE-CIP1-001 (Coating Inspector Level 1) Certification Exam is an internationally recognized certification that is designed to ensure that individuals have the knowledge and skills required to perform as a coating inspector. Coating Inspector Level 1 certification exam is offered by the National Association of Corrosion Engineers (NACE) International, which is a professional organization that focuses on the prevention and control of corrosion.
Tested Material Used To NACE-CIP1-001: https://www.actualcollection.com/NACE-CIP1-001-exam-questions.html
Steps Necessary To Pass The NACE-CIP1-001 Exam: https://drive.google.com/open?id=1U0YqMSit5_Xa8EmdpczDdLkcM8tDqveE