Best Value Available! 2024 Realistic Verified Free D-PCM-DY-23 Exam Questions
Pass Your Exam Easily! D-PCM-DY-23 Real Question Answers Updated
NEW QUESTION # 53
How many bits are in each section of an IPv6 address?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 54
If a user's IP phone sends a frame to a Dell EMC N-Series switch with a dot1p value of 5 in the frame header, what will the switch do to this frame by default?
- A. Marks it as Discard Eligible
- B. Overwrites the COS value to zero
- C. Treats it as Critical
- D. Drops all frames with this COS value
Answer: C
NEW QUESTION # 55
A group of four switches are configured to be part of a VRRP group with the following configurations:
- Switch1: IP 192.168.10.11, Priority 11
- Switch2: IP 192.168.10.12, Priority 12
- Switch3: IP 192.168.10.13, Priority 13
- Switch4: IP 192.168.10.14, Priority 14
The switches are initially disconnected from the network and come online in the following order: Switch3, Switch2, Switch4, Switch1.
If preempt is disabled, which switch is expected to be the Primary?
- A. Switch3
- B. Switch4
- C. Switch1
- D. Switch2
Answer: A
NEW QUESTION # 56
A user's workstation has an IP phone connected to a Dell EMC N-Series switch.
What is the recommended number of VLANs that should be configured on the switch port?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 57
Which protocols can be used to send configuration information to an IP phone?
- A. ISDP and LLDP only
- B. ISDP, LLDP, and SNMP
- C. ISDP and SNMP only
- D. LLDP and SNMP only
Answer: A
NEW QUESTION # 58
A router from a different AS is advertising a route to Area 0.
How will the network route appear in the routing table?
- A. IA
- B. R
- C. E2
- D. B
Answer: C
NEW QUESTION # 59
A network administrator is setting up a Class 5 powered device in their network.
Which Dell EMC N-Serves switch model(s) will support this device?
- A. N1500P
- B. N3000P only
- C. N1100P and N2000P
- D. N2000 and N3000P
Answer: D
NEW QUESTION # 60
Which Layer 2 network protocol is used for automatic configuration of switch VLANs and dynamically manages VLAN membership on trunk ports?
- A. MSTP
- B. PVST
- C. RSTP
- D. GVRP
Answer: D
NEW QUESTION # 61
Which protection is provided by the spanning tree root guard feature enabled on a switch port?
- A. Filters all inferior BPDUs received on the port
- B. Moves the port to a root-inconsistent state if a superior BPDU is received
- C. Forces the port to become the spanning tree root port
- D. Advertises the switch as the spanning tree root
Answer: B
NEW QUESTION # 62
A network administrator wants to lock down network access using port security.
What allows an administrator to specify a list of host MAC addresses that are allowed on a port?
- A. Sticky mode
- B. Static locking
- C. Dynamic locking
- D. Switchport mode
Answer: B
NEW QUESTION # 63
In the VRRP configuration between two switches, switch A is configured with priority 150 and switch B with priority 100.
Which configuration is valid to trigger fail over if the tracked interface on the Primary unit is down?
- A. Switch-A (config-if)# vrrp 10 track vlan 105 decrement 40
- B. Switch-B (config-if)# vrrp 10 track vlan 104 decrement 40
- C. Switch-A (config-if)# vrrp 10 track vlan 105 decrement 60
- D. Switch-B (config-if)# vrrp 10 track vlan 104 decrement 60
Answer: C
NEW QUESTION # 64
Which Dell PowerSwitch N-Series model supports the BGP and stack features?
- A. N2224PX-ON
- B. N3224T-ON
- C. N1124T-ON
- D. N3208PX-ON
Answer: B
NEW QUESTION # 65
What is the effect of the default pre-empt setting on a Dell PowerSwitch N-Series switch when VRRP is enabled?
- A. Forces the system to change the Primary router if another router with a lower priority joins the VRRP group.
- B. Prevents the Primary router from failing and the Backup router remains as backup forever.
- C. Forces the system to change the Primary router if another router with a higher priority joins the VRRP group.
- D. Prevents the Backup router with the higher priority from becoming the Primary router.
Answer: C
NEW QUESTION # 66
N4032F#show interfaces status
N4032F#show interfaces port-channel 1
Hash Algorithm Type
- Source MAC, VLAN, EtherType, source module and port Id
- Destination MAC, VLAN, EtherType, source module and port Id
- Source IP and source TCP/UDP port
- Destination IP and destination TCP/UDP port
- Source/Destination MAC, VLAN, EtherType, source MODID/port
- Source/Destination IP and source/destination TCP/UDP port
- Enhanced hashing mode
N4032F#
A Dell EMC N-Series switch has been configured with a 2-member port-channel; however, only one link is currently active.
Based on the exhibit, why is only one link active?
- A. Te1/0/6 interface is administratively disabled
- B. Hash algorithm is configured for active-passive
- C. Speed setting is different between ports
- D. Minimum links value for Po1 is set to "1"
Answer: C
NEW QUESTION # 67
Which command sets the Expedited Forwarding bit on all matched traffic?
- A. classofservice ip-dscp-mapping 46 0
- B. classofservice trust ip-dscp
- C. switchport voice vlan dscp ef
- D. mark ip-dscp ef
- E. match ip dscp ef
Answer: D
NEW QUESTION # 68
Which command should a network administrator use to configure a group of interfaces on a Dell EMC N4000 Series switch?
- A. interface tengigabitethernet 1/0/1-8
- B. interface range tengigabitethernet 1/0/1, 1/0/8
- C. interface range gigabitethernet 1/0/1-8
- D. interface range tengigabitethernet 1/0/1-8
Answer: D
NEW QUESTION # 69
What is an accurate statement about configuring a LAG on a Dell EMC N-Series switch?
- A. All interfaces in the port-channel can be configured for different speeds
- B. A physical interface can belong to only one port-channel
- C. At least one interface must be a trunk port
- D. A port-channel is considered up when all members in the link are up
Answer: B
NEW QUESTION # 70
......
Actual Questions Answers Pass With Real D-PCM-DY-23 Exam Dumps: https://www.actualcollection.com/D-PCM-DY-23-exam-questions.html