Brilliant H35-211_V2.5-ENU Exam Dumps Get H35-211_V2.5-ENU Dumps PDF
H35-211_V2.5-ENU Dumps PDF - H35-211_V2.5-ENU Real Exam Questions Answers
The Huawei H35-211_V2.5-ENU (HCIP-Access V2.5) Certification Exam is intended for professionals who are involved in the planning, deployment, and management of access networks. This includes network engineers, network administrators, system integrators, and technical support personnel who work with Huawei access network products and solutions. The exam is also suitable for individuals who are interested in gaining a deeper understanding of access network technologies and solutions. The certification obtained from this exam is recognized globally and can open doors to new career opportunities in the field of network engineering and management.
NEW QUESTION # 185
esight is a network management software positioned in enterprise network scenarios. It can view detailed information of onu devices, including: (Multiple Choice)
- A. Rate
- B. Optical module temperature
- C. UNT port information
- D. Optical module transmit power
Answer: A,B,C,D
NEW QUESTION # 186
OLT equipment supports the use of authority templates to control the programs that multicast users can watch.
- A. False
- B. True
Answer: B
NEW QUESTION # 187
ONU cannot be automatically discovered, what are the possible causes of failure? (Multiple choice)
- A. There is a rogue ONU, which interferes with other ONUs and cannot work normally.
- B. The PON port is faulty.
- C. The actual distance from the ONU to the OLT is outside the range of the distance compensation distance configured by the OLT.
- D. The ONU is not powered on.
Answer: A,B,C,D
NEW QUESTION # 188
In the FTTX network, which of the following principles is wrong when planning data for broadband services?
- A. The same PON port is marked with different outer labels for different services
- B. If the outer labels of different PON ports are the same, the inner labels cannot be the same
- C. If the outer labels of different PON ports are different, the inner labels can be the same
- D. The network management should use QinQ VLAN
Answer: D
NEW QUESTION # 189
View the protection configuration in the OLT example as follows:
Huawei (config) =protect-group 0 protect-target gpon-uni-port work mode time delay
Huawei (protect-group-0) #protect-group member port 0/5/0role work
Huawei (protect-group-0) #protect-group member port 0/5/l role protect
Huawei (protect-group-0) #protect-group enable
According to the above information, the following statement which is correct? (Multiple choice)
- A. GP ON Type B single-homing protection is configured
- B. The member port of this protection type must be the same as the port on the GP ON board
- C. After the protection group is created, the default status of the protection group is disabled, and you need to command the protect-group enable to enable the protection group.
- D. When port 0/5/0 fails, the system can automatically switch to port 0/5/1 to maintain continuous access services
Answer: A,C,D
NEW QUESTION # 190
The prerequisites for eSight to automatically discover OLT and Mxu devices through IP addresses do not include?
- A. esight and the device need to be in the same network segment, otherwise the device cannot be discovered using the ARP broadcast protocol
- B. Esight and equipment can be routed and communicated (Ping each other)
- C. SNMP parameters in esight example have been configured and are consistent with the SNMP parameters on the device side
- D. Have the operation authority of "resource access".
Answer: A
NEW QUESTION # 191
When dealing with voice faults, sometimes it is necessary to capture packets for fault analysis. If the user ID of the calling user in the captured SIP message is displayed as Sip: [email protected], which description is wrong? (Multiple choice)
- A. The host IP address is 191.169.1.112
- B. The transport layer protocol uses TLS
- C. The user phone number is 2270808
- D. The server port is 5060
Answer: B,D
NEW QUESTION # 192
In the U2000 network management, under the GPON template view, which template can be seen?
a) Route template
b) Service template
c) DBA template
d) GPON ONT capability template
e) GPON alarm template
f) MDU SNMP template
- A. abo
- B. abed
- C. abede
- D. abedef
Answer: D
NEW QUESTION # 193
The ONT terminal under a PON port cannot be automatically discovered. Which of the following options is impossible?
- A. PON port optical module failure
- B. The PON port does not have the automatic discovery function turned on
- C. Gemport configuration error
- D. The light attenuation caused by the optical path problem is too large
Answer: C
NEW QUESTION # 194
Under the H.248 protocol, if the signaling IP and media IP are both 10.1.1.100/8, and the voice gateway is 10.1.1.1, when configuring the voIP service, which of the following command is wrong?
- A. Use the command ip address signaling 10.1.1.100 10.1.1.1 in voip mode to configure the signaling IP
- B. Use the if-h248 attributei command to configure interface attributes under the voice interface
- C. Use the reset cold start command under the voice interface to make the interface attribute configuration effective
- D. Use the command ip address media 10.1.1.100 10.1.1.1 to configure the media IP in voip mode
Answer: A
NEW QUESTION # 195
The automatic discovery methods provided by esight include network segment method, ARP method and routing method. At the same time, it supports the creation of the network segment or IP address of the device that does not need to be accessed as an exclusion list, and the network segment or IP address configured in the exclusion list is automatically passed during the automatic discovery of the device.
- A. False
- B. True
Answer: B
NEW QUESTION # 196
If multiple SIP messages belong to the same call of the same SIP user, which field in these messages has the same value?
- A. Cseq
- B. via
- C. Sr art-line
- D. Call-ID
Answer: D
NEW QUESTION # 197
When using the H.248 protocol to deploy VoIP services, the registration information sent by the MG to the MGC contains the following information, indicating that the command to send this letter is
Services {Method=Restart
Reason=[901])
- A. reboot system
- B. reset cold start
- C. ON Tre-register
- D. board restart
Answer: B
NEW QUESTION # 198
If multicast services are only deployed in private networks, which multicast address segment should be preferred when planning?
- A. 224.0.0.0/8
- B. 232.0.0.0/8
- C. 225.0.0.0/8
- D. 239.0.0.0/8
Answer: B
NEW QUESTION # 199
After the ONU is powered on, the unconfigured ONU cannot be automatically discovered on the OLT. What is the reason for the impossibility?
- A. Unplanned ONU ID
- B. The actual distance from the ONU to the OLT is outside the range of the distance compensation distance configured by the OLT
- C. There is a rogue ONU, which interferes with other ONU and cannot work normally
- D. ONU hardware failure
Answer: A
NEW QUESTION # 200
During the implementation of QoS for home broadband services, the DBA speed limit function is configured. Where is it taking effect?
- A. BRAS
- B. OLT
- C. ONU
- D. ODN
Answer: B
NEW QUESTION # 201
Which statement about DHCP options82 is wrong?
- A. The DHCP Option82 switch is divided into four levels: global level, port level, service virtual port level, and VLAN level. Only when all the switches of each level are turned on, the system will add Option82 information to the uplink DHCP message.
- B. The DHCP Option82 port configuration on the OLT is enable by default
- C. When the DHCP client sends a request message to DHCP servex, if it needs to go through a DHCP relay, the DHCP relay will add Option 82 to the request message.
- D. The DHCP client sends the request message in the form of unicast during initialization.
Answer: D
NEW QUESTION # 202
There is no sound when the phone is off-hook. You can use the POTs external line test to check whether there is a line loop between the terminal phone and the POTS port. Which of the following commands is used for the external line test on the MDU side?
- A. pots cir cult-test
- B. ont pots-test-threshold restore
- C. pots loop-line-test
- D. ont pots-test
Answer: D
NEW QUESTION # 203
Which of the following descriptions about the PC roaming process between different AP is wrong?
- A. The PC sends an association request request after receiving the new AP response message, and then establishes a new connection
- B. The PC can establish a new connection after receiving the new AP response message
- C. The new AP sends a response message after receiving the request frame from the PC
- D. PC sends 802.11 request frame to new AP in various channels
Answer: B
NEW QUESTION # 204
Rules can be formulated based on link layer information such as source MAC address, VLAN ID, Layer 2 protocol type, destination MAC address, etc. What is the ACL for data processing?
- A. User-defined ACL
- B. Basic ACL
- C. Link layer ACL
- D. Advanced ACL
Answer: C
NEW QUESTION # 205
Ethernet port protection group refers to configuring the upstream port of the device as a protection group. The working port carries services, while the protection port does not carry services and in a backup state.
- A. TRUE
- B. FALSE
Answer: A
NEW QUESTION # 206
When the ONT fails or the hardware is upgraded, the ONT needs to be replaced. The ONT service needs to be deleted on the OLT, then delete the ONT terminal and finally the new ONT service is configured.
- A. False
- B. True
Answer: A
NEW QUESTION # 207
The data multiplexing mode of 10G GPON is similar to GPON, and TDMA technology is still used in the upstream.
- A. False
- B. True
Answer: B
NEW QUESTION # 208
If there is a rogue onu under the OLTP ON port and the ONT is online, it will cause some other ONT or all ONT under the same-PON to go offline or frequently go online and offline.
- A. False
- B. True
Answer: B
NEW QUESTION # 209
Which of the following options can be used to carry the SIP protocol? (Multiple choice)
- A. SCTP
- B. RTCP
- C. TLS
- D. TCP
Answer: A,C,D
NEW QUESTION # 210
......
The Huawei H35-211_V2.5-ENU (HCIP-Access V2.5) Exam is a certification exam that validates the knowledge and skills of IT professionals in designing and deploying access networks using Huawei products and solutions. The exam covers a wide range of topics related to access network architecture, protocols, security, and troubleshooting.
Valid H35-211_V2.5-ENU Test Answers & Huawei H35-211_V2.5-ENU Exam PDF: https://www.actualcollection.com/H35-211_V2.5-ENU-exam-questions.html