(Dec-2023) Latest JN0-363 Dumps for Success in Actual Juniper Certified
Changing the Concept of JN0-363 Exam Preparation 2023
NEW QUESTION # 76
When would you use the qualified-next-hop statement with a static route?
- A. You can use it to install the static route into different routing tables.
- B. You can use it to specify multiple next hops with different preferences.
- C. You can use it to resolve the next hop if the next hop is not directly connected.
- D. You can use it to send unwanted traffic to a null route.
Answer: B
Explanation:
https://www.juniper.net/documentation/us/en/software/junos/static-routing/topics/ref/statement/qualified-next-hop-edit-routing-options.html
https://www.juniper.net/documentation/us/en/software/junos/static-routing/topics/topic-map/static-route-prefer-qualified-next-hop.html: Qualified next hops allow you to associate one or more properties with a particular next-hop address. You can set an overall preference for a particular static route and then specify a different preference for the qualified next hop. For example, suppose two next-hop addresses (10.10.10.10 and 10.10.10.7) are associated with the static route 192.168.47.5/32. A general preference is assigned to the entire static route, and then a different preference is assigned to only the qualified next-hop address 10.10.10.7. For example:
NEW QUESTION # 77
Exhibit
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Traffic ingressing ge0/0/0 that Is tagged with VLAN 200 will egress ge-0/0/1 with an outer VLAN tag of 200.
- B. Traffic ingressing ge-0/0/0 that is tagged will VLAN 100 will be dropped.
- C. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0/1 unchanged.
- D. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0M with an outer VLAN tag of 200.
Answer: B,C
NEW QUESTION # 78
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)
- A. ring
- B. mesh
- C. tree
- D. star
Answer: C,D
NEW QUESTION # 79
Exhibit
You are asked to configure the OSPF environment to prevent the DRother routers from participating in DR/BDR election.
Referring to the exhibit, which command will accomplish this task?
- A. set protocols ospf area 0.0.0.0 interface ge-0/0/l priority 255
- B. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type nbma
- C. set protocols ospf area 0.0.0.0 interface ge-0/0/1 priority 0
- D. set protocols ospf area 0.0.0.0 interface ge-0/0/1 interface-type p2p
Answer: A
NEW QUESTION # 80
Which two interface types are used as tunnel endpoints? (Choose two.)
- A. ge
- B. gr
- C. ip
- D. ae
Answer: A,C
NEW QUESTION # 81
You are establishing RSVP LSPs through your MPLS-enabled network. You are asked to ensure that the LSPs will support end-to-end class-of-service handling.
Which statement is correct in this scenario?
- A. Configure implicit-null on all MPLS-enabled devices.
- B. Configure entropy-label on the egress device.
- C. Configure ultimate-hop-popping on the egress device.
- D. Configure explicit-null on all MPLS-enabled devices.
Answer: D
NEW QUESTION # 82
Which two protocols are capable of distributing labels for segment routing? (Choose two.)
- A. LDP
- B. OSPF
- C. IS-IS
- D. RSVP
Answer: B,C
NEW QUESTION # 83
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers. Which statement is true about the DIS election in this scenario?
- A. The router with the lowest MAC address will be elected as the DIS.
- B. The router with the highest numerical lo0 IP address will be elected as the DIS.
- C. The router with the lowest numerical lo0 IP address will be elected as the DIS.
- D. The router with the highest MAC address will be elected as the DIS.
Answer: D
Explanation:
A router's priority for becoming the designated router is indicated by an arbitrary number from 0 through 127, which you configure on the IS-IS interface. The router with the highest priority becomes the designated router for the area (Level 1, Level 2, or both), also configured on the IS-IS interface. If routers in the network have the same priority, then the router with the highest MAC address is elected as the designated router. By default, routers have a priority value of 64.
https://www.juniper.net/documentation/us/en/software/junos/is-is/topics/concept/routing-protocol-is-is-security-designated-router-understanding.html
NEW QUESTION # 84
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.2.2.2 are less preferred than routes from 10.3.3.3
- B. Routes from 10.2.2.2 are less preferred than the default local preference
- C. Routes from 10.1.1.1 are more preferred than routes from 10.2.2.2
- D. Routes from 10.3.3.3 are more preferred than the default local preference
Answer: D
NEW QUESTION # 85
Exhibit
Routers R1 and R4 have a VRRP priority of 90, while R2 and R3 have default VRRP priorities Referring to the exhibit, which router will be elected as the primary VRRP router?
- A. R4
- B. R1
- C. R3
- D. R2
Answer: B
NEW QUESTION # 86
Which IPv6 address type is used as an identifier for a group of IPv6 interfaces that might belong to different nodes, typically, the nearest node?
- A. multicast
- B. unicast
- C. anycast
- D. broadcast
Answer: C
NEW QUESTION # 87
Referring to the exhibit, what will happen to untagged frames?
- A. The untagged frames are associated with VLAN 10.
- B. The untagged frames are dropped.
- C. The untagged frames are load balanced between VLAN 10 and VLAN 20.
- D. The untagged frames are associated with VLAN 20.
Answer: B
NEW QUESTION # 88
Which statement describes integrated routing and bridging (IRB) interfaces?
- A. An IRB interface defines a bridge domain.
- B. An IRB interface enables Layer 2 switching on the router.
- C. An IRB interface assigns interfaces to VLANs.
- D. An IRB interface Is an IP gateway For hosts of a bridge domain.
Answer: B
NEW QUESTION # 89
What are two types of SlDs used in segment touting? (Choose two.)
- A. interface
- B. adjacency
- C. node
- D. link
Answer: B,C
Explanation:
https://zartmann.dk/sr-intro/
NEW QUESTION # 90
Click the Exhibit.
Referring to the exhibit, what is the correct OSPF interface state for the ge-0/0/1 interface?
- A. BDR
- B. Down
- C. DR
- D. DRother
Answer: C
NEW QUESTION # 91
You are asked to configure an LSP which uses the OSPF link state database for path computations. Which two statements are correct in this scenario? (Choose two.)
- A. You must use the policing parameter in the label-switched-path configuration.
- B. Traffic engineering extensions are not enabled by default in OSPF.
- C. Traffic engineering extensions ate enabled by default In OSPF.
- D. You must use the no-cspf parameter in the label-switched-path configuration.
Answer: B,D
Explanation:
The no-cspf command will activate usage of OSPF DB https://www.juniper.net/documentation/us/en/software/junos/ospf/topics/topic-map/configuring-ospf-support-for-traffic-engineering.html Not enabled by default for ospf
NEW QUESTION # 92
......
JN0-363 Exam Crack Test Engine Dumps Training With 293 Questions: https://www.actualcollection.com/JN0-363-exam-questions.html
Getting JN0-363 Certification Made Easy: https://drive.google.com/open?id=1-hq4WQko2q1El0uWGbhc7Qwpwbu9O0n7