Get Started: 5V0-41.20 Exam [2021] Dumps VMware PDF Questions
5V0-41.20 Premium Exam Engine pdf Download
How much VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Cost
The price of the VmWare vSAN 6.7 Specialist exam is $250 USD. For more information related to exam price, please visit VmWare website as prices of VmWare exams fees vary country wise.
NEW QUESTION 17
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator is receiving complaints that a real-time voice application is not performing well, with choppy audio, and dead audio especially during peak traffic times.
What two actions can the administrator take to diagnose and fix the issue? (Choose two.)
- A. Check the status of the links using the QoE and Transport tabs for any degraded underlay issues or congestion issues.
- B. Configure a QoS policy to rate limit all traffic during peak times.
- C. Ensure that the realtime application is matching the correct application type using the diagnostics page.
- D. Configure a QoS policy to load balance the realtime traffic across all links.
Answer: A,B
NEW QUESTION 18
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already verified the configuration is correct.
Which two parameters should the administrator review to troubleshoot this issue? (Choose two.)
- A. Check the flows to verify which Business Policy the traffic of interest is matching
- B. Change the bandwidth measurement under WAN Overlay Advanced Settings
- C. Check the underlay network (bandwidth, latency, jitter, packet loss)
- D. Look under Monitor, check Business priority tab
Answer: C,D
NEW QUESTION 19
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
The network administrator determines the issue preventing the Dallas Branch from coming online.
Refer to the Exhibit(s).
What must the administrator do for the Edge to communicate with the Orchestrator and other branches?
- A. Update the Orchestrator to the latest version as it enables "Auto WAN Swapping"
- B. Reverse the WAN Overlay configurations
- C. Create a User-defined WAN Overlay to bond both interfaces
- D. Delete the User Defined WAN Overlays as the Orchestrator will discover these automatically on MPLS and Internet
Answer: D
NEW QUESTION 20
Scenario 1:
A network administrator is tasked with enabling SO-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
After the network administrator has determined the problem with the Edge not being able to access the Internet, the administrator receives another error stating that the SD-WAN Orchestrator is still not reachable.
The VCO's address is Amer-vcoOl.velocloud.net.
Refer to the Exhibit(s).
What might be disallowing the Edge to communicate with the Orchestrator?
- A. The SD-WAN Orchestrator has a limited 60-second window for the Edge to come online.
- B. The local firewall that the Edge uses to reach externally is blocking UDP Port 53 in both directions.
- C. The SD-WAN Orchestrator specified is incorrect, and a new activation email needs to be sent.
- D. The SD-WAN Orchestrator is not being resolved for DNS.
Answer: A
NEW QUESTION 21
Scenario 1:
The Dallas Branch location is having issues getting activated. The local network administrator is aware that the Edge device received a DHCP address and was able to connect to the internet. The Orchestrator is reporting the Edge as Down. No other changes were made post activation.
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of time. The organization has several branch sites. One is am Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Refer to the Exhibit(s).
What is the cause of this issue?
- A. The activation link did not contain any post-activation configuration to allow the Orchestrator to communicate with the Edge.
- B. The activation link contained incorrect configurations for WAN overlays and WAN interfaces.
- C. The activation link did not specify the updated image location requiring the Edge to be re-activated.
- D. The Edge will be offline for about 4 hours until it has completed the factory image installation.
Answer: C
NEW QUESTION 22
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has received an email from the applications development team requesting connectivity to their AWS VPC.
The administrator has configured the tunnel via the VMware SD-WAN Gateway. The tunnel status icon has not turned green.
Where are two places the administrator must check? (Choose two.)
- A. Determine if the PSK is mismatched between the AWS side and the VeloCloud Edge.
- B. Determine if the NVS has been enabled and assigned to a profile.
- C. Determine if the PSK is mismatched between the AWS side and the VeloCloud Gateway.
- D. Determine if the DH parameter on the Edge has been configured.
Answer: A,C
NEW QUESTION 23
Scenario 2:
After completing the branch activation activities for ail required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certconfigurations have been complete. The administrator also observed that several reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure thatall sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator has been told that Dallas needs some high-availability in the event that the SD-WAINJ Edge goes offline for whatever reason. There is limited budget so the administrator must use the other available CE router as a fallback mechanism. The administrator will use VRRP to provide HA. When configuring VRRP, the SD-WAN Edge service restarted.
What caused this behavior?
- A. The device is faulty and will need a replacement.
- B. The administrator failed to specify the Edge Type as a VeloCloud Cluster.
- C. The administrator failed to specify the Edge Type as a VeloCloud Active Standby Pair.
- D. This is an expected behavior.
Answer: D
NEW QUESTION 24
Scenario 2:
After completing the branch activation for all required branches, the network administrator attempts to test connectivity between the various branches and between hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the some applications they are accessing.
Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A technician has added Edges to an East Coast Profile. These Edges are not able to communicate via dynamic tunnels to Edges in the West_Coast profile. The technician has noticed that some Edges are able to establish dynamic tunnels.
What could be preventing Edges from being able to establish dynamic tunnels?
- A. The profiles are configured to only allow dynamic branch to branch for Edges within the same profile.
- B. Neither profile has been configured to utilize cloud gateways.
- C. The profiles are not configured to allow dynamic branch to branch VPNs.
- D. None of the existing profiles have Cloud VPN enabled thus preventing dynamic tunnels.
Answer: C
NEW QUESTION 25
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY Hub location. While attempting to deploy the VNF, the process keeps failing.
Where can the administrator check to see more detail?
- A. VCO > Monitor > Logging
- B. VCO > Test & Troubleshoot > Remote Actions > Alerts
- C. VCO > Monitor > Events
- D. VCO > Test & Troubleshoot > Remote Diagnostics > Events
Answer: A
NEW QUESTION 26
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
A network administrator decides to deploy a local Checkpoint VNF appliance on the Edge in London to cut back on unnecessary traffic towards the NY hub location.
The Checkpoint VNF and associated security services were successfully deployed at the London Branch.
Users are now are complaining that Webpages are extremely slow to load, just like before.
What should the administrator do?
- A. Verify to see if a firewall rule in the Edge is set to allow traffic to the Checkpoint VNF.
- B. Reboot the Edge, as this is a requirement in the deployment of a Security VNF.
- C. Disable and redeploy the VNF with lower memory requirements.
- D. Check the flow records in Remote Diagnostics.
Answer: C
NEW QUESTION 27
Scenario 1:
A network administrator is tasked with enabling SD-WAN at three branch locations. A topology has been provided for reference. For each site, the administrator is having issues bringing edges online, as another administrator has gone ahead and created a configuration ahead of lime. The organization has several branch sites. One is an Internet-only site and two are Hybrid locations with both internet and MPLS. The last location is MPLS only. There are hub data center locations in this environment as well. Please refer to the topology.
Exhibit.
When attempting to activate an Edge, after clicking on the "activation link" in the email that was sent to the network administrator, the Edge's local UI shows as "Internet down". This is preventing the Edge from coming online and being activated. When referring to the output, the network administrator notices that the Edge has received DHCP addressing.
What could be preventing the Edge from coming online?
- A. Cloud VPN is not enabled in the AMER Branch profile.
- B. The next hop does not respond to ICMP pings.
- C. The Edge's profile does not specify the correct Edge Model.
- D. The subnet mask assigned to the Edge is incorrect.
Answer: C
NEW QUESTION 28
Scenario 3:
After resolving numerous connectivity issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
Users at a remote office are complaining about poor performance with certain applications. The network administrator has already configured Business Policies based on these requirements.
What is the sequence of parameters that the administrator can check to troubleshoot this problem? (Choose two.)
- A. Under Monitor, check Routing tab.
- B. Check underlay network (bandwidth, latency, jitter, packet loss).
- C. Review Business Policies configuration and match them against the business requirements.
- D. Change the bandwidth measurement under WAN Overlay Advanced Settings.
Answer: A,B
NEW QUESTION 29
Scenario 3:
After resolving numerous connectivity Issues throughout the various branch sites, connectivity between applications and users is finally present. The network administrator is informed that during certain tests, applications are not performing as they are expected to. Users report that call quality has not fully improved and that some of their calls either drop or have poor voice quality where the conversation is breaking up. Other users are noticing that file transfers are slower than expect. A group of users from a few sites have reported slowness in accessing internal and external applications.
Exhibit.
The network administrator has been made aware that Chicago is receiving traffic from non-SD-WAN sites, bottlenecking Chicago's interfaces. The network administrator's VMware SE has mentioned using the uplink feature to help resolve this.
What are two ways the uplink feature should be used in this scenario? (Choose two.)
- A. Prevent the site in question from becoming a transit site.
- B. Direct all traffic to that neighbor designated as an uplink,
- C. Set the uplink community to forward traffic to a group of neighbors.
- D. Stop mutual redistribution of routes from underlay and overlay.
Answer: A,B
NEW QUESTION 30
Scenario 2:
After completing the branch activation activities for all required branches, the network administrator attempts to test connectivity between the various branches and between the hubs and branches. The administrator notices a lack of connectivity despite being certain that configurations have been complete. The administrator also observed that several users are reporting intermittent connectivity to some of the applications they are accessing. Other users are reporting no access to these applications. Other users at some of the branches claim they cannot get to certain public resources. The administrator wants to ensure that all sites can talk to each other and all resources are accessible.
Exhibit.
When checking connectivity from the San Jose branch, all users report that they can reach certain resources at the main data center. They are unable to reach locations elsewhere. The network administrator investigates and first looks at the Overlay Flow Control (OFC) Table.
What should the network administrator look for next to determine what the issue might be?
- A. Check Test & Troubleshoot and review a route table dump of the NY hub site.
- B. Determine if OSPF has been configured on the MPLS Routers at the hub.
- C. Check the Global Segment Configuration to see if it has the Routing Flag enabled.
- D. Check with the local network administrator to see if the routes for the SD-WAN sites are present in San Jose's branch router.
Answer: C
NEW QUESTION 31
......
The benefit of obtaining the VMware 5V0-41.20: VMware vSAN 6.7 Specialist Exam Certification
- It help you to make your career into Application Development Administration and Application Development Administrator used to get respectful plus highly paid jobs into Market. Statistics on the VmWare Certification website indicate that 91% of hiring managers consider certification as part of their hiring criteria. The main benefit of earning a VmWare Certification is that it shows potential employers/hiring managers that you have the necessary requirements and skills to be the perfect candidate for the job.
- This certification will judge your skills and knowledge on your understanding of Application Development security concepts & understanding of the need to secure an Application Development, what objects can be secured, what objects ought to be secured, user accounts, roles.
- This certification credential will give you edge over other counterparts. Apart from knowledge of 5V0-41.20: VMware vSAN 6.7 Specialist Exam.
Pass Your VMware Exam with 5V0-41.20 Exam Dumps: https://www.actualcollection.com/5V0-41.20-exam-questions.html