HPE2-T37 Dumps (2023) Prepare Your Exam With 81 Questions
New HPE2-T37 Dumps - Real HP Exam Questions
HPE2-T37 exam covers a range of topics related to HPE OneView, including installation and configuration, resource management, monitoring and reporting, and troubleshooting. To pass HPE2-T37 exam, candidates must have a thorough understanding of these topics and be able to apply them in a real-world setting.
HP HPE2-T37 exam is an important certification exam for IT professionals who are looking to enhance their skills and knowledge in managing HPE OneView infrastructure. HPE2-T37 exam is designed to test the candidate's understanding of HPE OneView architecture, installation, configuration, management, and troubleshooting. Passing HPE2-T37 exam is a crucial step towards becoming an HPE certified professional in HPE OneView.
NEW QUESTION # 24
Your workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile within Logical Interconnect Group and update all servers.
- B. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- C. Set a specific workload profile within server profile template and update all profiles.
- D. Set a specific workload profile using IL0 interface for each individual server.
Answer: C
NEW QUESTION # 25
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION # 26
Which statement about the volume template is true?
- A. A volume created using this template mil not support snapshots
- B. Users will be able to select storage pool during volume creation
- C. Users will be able to change sharing type and volume capacity
- D. A volume created using this template will not support deduplication
Answer: C
NEW QUESTION # 27
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- B. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
- C. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- D. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
Answer: D
Explanation:
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
NEW QUESTION # 28
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. The sFlow option must be enabled and configured.
- B. Both FlexNlCs must be connected to the same network.
- C. An upgrade license must be purchased and deployed.
- D. The Compute Module profile must have exactly two connections defined.
Answer: B
NEW QUESTION # 29
Which connection type can be defined within a server profile for an MPE ProLiant DL server?
- A. iSCSI
- B. RoCE
- C. FC
- D. Ethernet
Answer: C
NEW QUESTION # 30
You plan to update HPE OneVew to the latest version
What Should you do Mora starting HPE OneView update?
- A. Put all servers managed through HPE OneView to maintenance state
- B. Run the Update Readiness checker tool to evaluate HPE OneView health status
- C. Disable HPE Remote Support at toe HPE OneView appliance level
- D. Create a support dump for the appliance and for all managed logical interconnects
Answer: B
NEW QUESTION # 31
Your customer plans to use HPE OneView to manage a small environment based on HPE ProLiant servers that includes G7 and Gen 10 systems. What should you explain to this customer?
- A. HPE ProLiant Gen 10 servers do not need an HPE OneView license.
- B. HPE ProLiant G7 and Gen10 cannot be managed using the same appliance.
- C. HPE Management Agent must he installed for HPE ProLiant Gen 10 servers.
- D. Not all of the features will be available for HPE ProLiant G7 systems.
Answer: A
NEW QUESTION # 32
Which statement about managing an HPE BiaoeSystem sever is true?
- A. An HPE server blade cannot be deleted from HPE OneView It must be physically removed from the enclosure
- B. Both c3000 and C7000 HPE BladeSystems enclosures can be imported to HPE Oneview for monitoring
- C. An HPE server blade can be removed trom HPE OneView by deleting the server from the Server Hardware section
- D. A muiti-enclosure Vrtuai Connect domain can be imported to HPE OneView without disrupting servers
Answer: C
NEW QUESTION # 33
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
- B. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
- C. A logical JBOD cannot be created during server profile creation and must be prepared in advance
- D. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
Answer: C
NEW QUESTION # 34
Which types of support dump can be created using HPE OneView? (Select two.)
- A. Appliance support dump
- B. Maintenance console support dump
- C. Logical enclosure support dump
- D. Enclosure group support dump
- E. Firmware deployment support dump
Answer: A,C
NEW QUESTION # 35
You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?
- A. Both FlexNlCs must be connected to the same network.
- B. An upgrade license must be purchased and deployed.
- C. The sFlow option must be enabled and configured.
- D. The Compute Module profile must have exactly two connections defined.
Answer: C
NEW QUESTION # 36
Which statement about the presented storage pools is true?
- A. All storage pools from the system named ThreePAR-1 can be used for volume provisioning
- B. HPE OneView can be used to configure replication only between managed storage pools
- C. All storage pools in managed state have a valid HPE OneView license applied
- D. Storage pools in discovered state can be removed from HPE OneView.
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks are not configured with the required Smart Link parameter.
- B. The other networks are not added to the Logical Interconnect Group configuration.
- C. The other networks are configured with a purpose other than General or Management.
- D. The other networks have Private Network' selected, which hides them from Compute Modules.
Answer: D
NEW QUESTION # 38
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- C. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame. - D. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
Answer: C
NEW QUESTION # 39
You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?
- A. When each of the frames has two Virtual Connect modules installed
- B. When each Virtual Connect module is installed in different frame
- C. When storm control or loop protection will be enabled for Virtual Connect modules
- D. When each Virtual Connect module is installed in different fabric
Answer: C
NEW QUESTION # 40
Click the option that will allow you to update the firmware of master and satellite modules.
Answer:
Explanation:
NEW QUESTION # 41
A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?
- A. Compute Module
- B. Master Module
- C. Storage Array
- D. Logical Enclosure
Answer: A
NEW QUESTION # 42
Your customer wants to manage their HPE Superdome Flex using HPE OneView.
Which component must be added to HPE OneView to accomplish this task?
- A. Baseboard Management Controller (BMC)
- B. Rack Management Controller (RMC)
- C. only the base chassis from the complex
- D. all nPARs created within the complex
Answer: A
NEW QUESTION # 43
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?
- A. It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
- B. It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
- C. It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.
- D. It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
Answer: A
NEW QUESTION # 44
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- B. PowerShell Library for HPE OneView allows scripted environment modification.
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: A
NEW QUESTION # 45
......
Get Ready with HPE2-T37 Exam Dumps: https://www.actualcollection.com/HPE2-T37-exam-questions.html
Dependable HPE2-T37 Exam Dumps to Become HP Certified: https://drive.google.com/open?id=1_p8hiCMTTh0aZcQf35eVFf3gbnJlsP9q