[Jan-2022] HP HPE0-J68 Dumps - Secret To Pass in First Attempt [Q62-Q85]

Share

[Jan-2022] HP HPE0-J68 Dumps - Secret To Pass in First Attempt

HP HPE0-J68 Exam Dumps [2022] Practice Valid Exam Dumps Question

NEW QUESTION 62
What can move data directly from a snapshot to backup storage independent of backup server software?

  • A. Virtual Lock
  • B. CLI
  • C. SSMC
  • D. Express Protect

Answer: D

Explanation:
The Express Protect feature offers data protection by facilitating Express Protect of snapshots from HPE 3PAR StoreServ to HPE StoreOnce.

 

NEW QUESTION 63
Which statement describes HPE StoreVirtual Network RAID functionality?

  • A. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
  • B. Network RAID 10 requires an even number of storage nodes.
  • C. Redundancy is managed on a per-volume basis.
  • D. Volumes remain available if an odd number of nodes are available.

Answer: C

Explanation:
Redundancy is managed on a per volume basis to improve storage utilization and to remove any simgle point of failure.

 

NEW QUESTION 64
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?

  • A. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
  • B. Design an array with older version of the firmware to ensure compatibility
  • C. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
  • D. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility

Answer: D

 

NEW QUESTION 65
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?

  • A. HPE SAN Network Advisor Professional
  • B. OneView Global Dashboard
  • C. HPE SAN Network Advisor Enterprise
  • D. 3PAR Host Explorer

Answer: C

 

NEW QUESTION 66
Refer to the exhibit.

A customer purchased a Primera C6S0 array to replace several older 3PAR arrays. They plan to upgrade the system as each 3PAP reaches the end of its lease. The initial sizing included 100TB effective capacity for an Oracle database environment.
The first 3PAR to come off lease has 100TB of VDI boot images that support thousands of users.
Which addition to the Primera should you recommend?
A)

B)

C)

D)

  • A. Option B
  • B. Option A
  • C. Option C
  • D. Option D

Answer: A

 

NEW QUESTION 67
What is the benefits of HPE synergy(Select 2)

  • A. It support up to 3 HPE store Virtual VSA nodes for storage RAID
  • B. It can use HPE 3PAR file persona for objet storage
  • C. It support HPE blade system C-Class Flex Fabrics Interconnect module (need to check)
  • D. It can compose and reclaim DAS storage
  • E. It can present block storage services from HPE 3par as part of the resource pool

Answer: D,E

 

NEW QUESTION 68
You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?

  • A. combine management and backup Ethernet traffic
  • B. consolidate activity windows for housekeeping tasks
  • C. use separate backup targets for different data types
  • D. size solution for a single backup device

Answer: B

 

NEW QUESTION 69
Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200

  • A. Persistent Checksum end-to-end data integrity (correct)
  • B. Online import license
  • C. Adaptive optimization and dynamic Optimization
  • D. Data at Rest Encryption

Answer: A

 

NEW QUESTION 70
What performance benefit is provided by using the HPE StoreVirtual DSM for Microsoft MPIO instead of the standard MPIO?

  • A. The HPE DSM increases availability and reduces latency and throughput.
  • B. The storage system, which holds a copy of the requested data, services the read I/Os.
  • C. The storage system, which receives a copy of the data, does not service the write I/O.
  • D. The iSCSI connections are blocked to non-critical nodes in the cluster by default.

Answer: B

 

NEW QUESTION 71
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?

  • A. One Config Advanced
  • B. HPE Storage Sizer
  • C. NinjaStars
  • D. StoreVirtual VSA Ready Nodes

Answer: D

Explanation:
HPE StoreVirtual VSA Ready Nodes-HPE tested reference configurations on HPE ProLiant servers that address typical virtualization and remote office use cases, and deployment of converged solutions.

 

NEW QUESTION 72
Refer to the exhibit.

You are designing a new Primera solution and demonstrating performance numbers to the customer. The customer reviews the configuration and requests a change to the configuration that will increase Random Write IOPS.
Which action will satisfy the customer request?

  • A. Upgrade the HPE Primera base model
  • B. Add more disks of smaller capacity
  • C. Change to larger SSDs
  • D. Add more FC Ports

Answer: C

 

NEW QUESTION 73
You are adding a new host for an HPE 3PAR StoreServ proof-of-concept .In addition to the host name ,What is the minimum information that is required to create a host profile?

  • A. Host WWN
  • B. Host Persona
  • C. Host MAC
  • D. Host set

Answer: A

 

NEW QUESTION 74
A customer asks for an integrated solution for their remote office with All-Flesh storage and ease of management. Application-aware replication to their main office is an important requirement.
Which HPE solution component should you discuss with the customer first?

  • A. HPE MSA 2052 Storage
  • B. HPE SimpliVity 380
  • C. HPE Nimble CS1000 system
  • D. HPE 3PAR StoreServ 8200

Answer: B

 

NEW QUESTION 75
Refer to the exhibit.

You create two snapshots of a thin provisioned base volume in an HPE Primer a. One snapshot is read only and the other is read-write. A write occurs at the location shown in in the diagram.
Place the actions on the left into the order they are taken on the right.

Answer:

Explanation:

1 - Redirect the snapshots
2 - Copy block to snapshot CPG
3 - Update the block with new data

 

NEW QUESTION 76
Which statement is correct when comparing functionalities of the AF,CF, and SF series in the nimble storage portfolio?

  • A. Zero copy clone are unique feature of all flash array within the nimble portfolio
  • B. Inline deduplication for complete array capacity in combination with compression is offered by the AF and SF series only (67) need to check
  • C. 99.9999% availability measured and guaranteed for AF and CF series arrays, SF series array offer 99.999% availability.
  • D. SF series supports storage snapshots and replication using veeeam backup & replication CS and AF series support storage snapshot only.

Answer: B

 

NEW QUESTION 77
Exhibit:

Which fabric design is shown?

  • A. meshed
  • B. single fabric
  • C. core-edge
  • D. cascaded

Answer: A

 

NEW QUESTION 78
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?

  • A. Express Writes
  • B. Adaptive Flash Cache
  • C. Thin Deduplication
  • D. Thin provisioning

Answer: B

 

NEW QUESTION 79
You have proposed a Primera array to a customer for primary storage. The customer currently has an older HPE 3PAR array and will continue to use it moving forward. The customer would like high availability configured.
Which RMC Peer Copy pre-requisites do you need to point out to the customer? (Choose two.)

  • A. Required license must be provided
  • B. Check that the 3PAR OS version is supported
  • C. RMC 6.2
  • D. 4-port 1 Gb Ethernet Adapter (NIC) is required in each array
  • E. 2-port 10 Gb Ethernet Adapter (NIC) is required in each array
  • F. Target drive type must match source drive type

Answer: A,D

 

NEW QUESTION 80
A customer asks you for a recommendation on setting up their new StoreOnce appliance. They plan to use NetBackup and need the highest performance setup they can get. Their local hosts are connected via FC and the rest are connected via a WAN.
Which backup target type should you recommend?

  • A. Catalyst
  • B. CIFS
  • C. S3
  • D. VTL

Answer: D

 

NEW QUESTION 81
A customer asks for a 50 TB disk-based backup solution with deduplication. They also need additional storage for test/dev purposes.
Which single HPE storage platform can you present to the customer that will meet both of their needs?

  • A. HPE Nimble CS series
  • B. HPE StoreOnce
  • C. HPE Nimble SF series
  • D. HPE StoreEasy Gateway

Answer: C

Explanation:
HPE quick specs , they also offer the flash-optimized performance needed to run development/test, QA, and analytics workloads on your backup data-plus production workloads when needed.

 

NEW QUESTION 82
A customer need to server 40TB via file protocols including SMB and FTP to a board range of client operating system in one location .security protocol dictate that data must be encrypted with FIPS 140-2 compliance. Which HPE storage solution you recommend?

  • A. HPE XP7 storage with encryption ready disk adapters
  • B. HPE MSA 2052 storage with HPE StoreEasy 3850 Gateway
  • C. HPE StoreOnce 5500with data in fight encryption .
  • D. HPE 3PAR 8200 using self-encrypting drive with 3PAR file persona

Answer: D

 

NEW QUESTION 83
You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

  • A. NinjaSTARS
  • B. Storage Sizing Tool
  • C. SAF Collect
  • D. One Config Advanced

Answer: D

 

NEW QUESTION 84
A customer purchased a StoreOnce 3620 earlier in the year and has decided to add a 10GBase-T adapter to it, which the customer sourced elsewhere and installed themselves. They complain that the new adapter is not configurable.
What is the most likely reason for this issue?

  • A. The StoreOnce needs to connect to InfoSight to validate the adapter authenticity
  • B. The customer failed to install a License to Use (LTU) for it
  • C. The StoreOnce software requires updating
  • D. Secure boot must be enabled in the BIOS to securely enable HBAs

Answer: C

 

NEW QUESTION 85
......

HPE0-J68 Exam Dumps PDF Guaranteed Success  with Accurate & Updated Questions: https://www.actualcollection.com/HPE0-J68-exam-questions.html

HPE0-J68 Dumps - Grab Out For [NEW-2022] HP Exam: https://drive.google.com/open?id=1YHuj9lIZNIMVbjtwo95j-3DHab8hNWaW