JN0-682 Dumps with Free 365 Days Update Fast Exam Updates
Verified JN0-682 dumps Q&As - 2024 Latest JN0-682 Download
Juniper JNCIP-DC certification and the JN0-682 exam provide IT professionals with an opportunity to demonstrate their expertise in data center networking using Juniper technologies. Data Center, Professional (JNCIP-DC) certification is well-respected in the industry and can help professionals advance their careers. Candidates who are interested in taking the exam should have extensive experience in data center networking and a thorough understanding of Juniper technologies.
Juniper JN0-682 certification exam is a valuable credential for network professionals who are looking to validate their knowledge and skills in data center technologies. Data Center, Professional (JNCIP-DC) certification is suitable for individuals who have experience with Juniper Networks data center solutions and are looking to advance their careers in this field. With proper preparation, candidates can pass the exam and earn the JNCIP-DC certification, which can help them stand out in the job market and advance their careers.
NEW QUESTION # 52
You have deployed two data centers that require a Layer 2 stretch between host1 and host2.
Referring to the exhibit, what does a Layer 2 stretch require?
- A. A VXLAN tunnel originating on the super Spine Layer in DC1 to the Super Spine Layer in DC2
- B. A VXLAN tunnel originating on the Spine Layer in DC1 to the Spine Layer in DC2.
- C. A VXLAN tunnel originating on VTEP1 to VTEP2
- D. A VPLS WAN connection data centers
Answer: C
NEW QUESTION # 53
Referring to the exhibit, you want to advertise the IRB routes between both routing instances.
Which two configuration parameters would be applied to accomplish this task? (Choose two.)
- A. Configure auto-export under both routing instances.
- B. Apply policy irb-A under instance Tenant_c and apply policy irb-c under instance Tenant_A as import policies.
- C. Apply policy irb-A under instance Tenant A and apply policy irb-c under instance Tenant_c as export policies.
- D. Configure vrf-table-label under both routing instances.
Answer: B,D
NEW QUESTION # 54
Referring to the exhibit,
you have a data center in which only the spine devices are using EVPN and VXLAN. The leaf nodes are multihomed in active-active mode to the spine nodes through ESI LAG interfaces. In this design, a link failure on the interface connecting the spine nodes would also cause all traffic from the spine to the leaf nodes to drop.
In this scenario, which command configured on which nodes would solve this problem?
- A. the set protocols evpn no-core-isolation command on the spine nodes
- B. the disable protocols evpn no-core-isolation command on the spine nodes
- C. the set protocols evpn no-core-isolation command on the leaf nodes
- D. the disable protocols evpn no-core-isolation command on the leaf nodes
Answer: B
NEW QUESTION # 55
You are deploying an EBGP IP fabric. In this scenario, which statement is true?
- A. Each spine should peer with every other spine using physical addresses.
- B. Each spine should peer with each leaf using physical addresses.
- C. Each spine should peer with each leaf using loopback addresses.
- D. Each spine should peer with every other spine using loopback addresses.
Answer: B
NEW QUESTION # 56
Exhibit.
Referring to the exhibit, you must advertise the Io0.12 interface as a type-5 route.
Which configuration parameter would be used to accomplish this task?
- A. Configure an export policy to advertise the interface route under protocols evpn.
- B. Configure a vrf-export policy to advertise the interface route under the routing instance.
- C. Configure auto-export under the routing instance.
- D. Configure vrf-table-label under the routing instance.
Answer: A
NEW QUESTION # 57
You are asked to enable visibility into your EVPN-VXLAN network traffic by monitoring traffic continuously. Which two statements are correct in this scenario? (Choose two.)
- A. You must enable sFlow monitoring on each interface individually.
- B. The sFlow agent is installed by default on your OFX Series switch.
- C. The sFlow agent needs to be manually installed on your QFX Series switch.
- D. You cannot enable sFlow monitoring on each interface individually.
Answer: D
NEW QUESTION # 58
Referring to the exhibit,
what effect does EVPN core isolation have?
- A. Leaf 1 will place the interfaces to connected hosts into LACP passive mode.
- B. Leaf 1 will take down all revenue interfaces.
- C. Spine 1 will block all traffic.
- D. Leaf 1 will send a pause frame to each connected host.
Answer: B
NEW QUESTION # 59
Your colleague has begun working on the base configuration for an active-active multihomed EVPN
connection shown in the exhibit.
Which two actions will ensure a successful implementation? (Choose two.)
- A. Change the ESI mode on PE2 to all-active
- B. Change the ESI value on the PE1 device to 00.22.44.88.00.22.44.66.88
- C. Change the ESI value on the PE2 device to 00.00.00.00.00.00.00.00.00.00
- D. Change the ESI mode on PE1 to signal-active
Answer: A,B
NEW QUESTION # 60
Exhibit.
Referring to the exhibit, you have a data center with two PODs. Seamless EVPN-VXLAN stitching is used to facilitate communication between the PODs.
Which three statements are true in this scenario? (Choose three.)
- A. AVXLAN tunnel can form between L2 and S1.
- B. AVXLAN tunnel can form between L2 and S3.
- C. AVXLAN tunnel can form between L1 and L4.
- D. AVXLAN tunnel can form between L1 and L2.
- E. A VXLAN tunnel can form between S1 and S2.
Answer: B,C,D
NEW QUESTION # 61
Which EVPN router type prevents BUM traffic from looping back to a multihued host?
- A. Ether auto discovery route
- B. Ethernet segment router
- C. Inclusive multicast-Ethernet tag route
- D. IP prefix route
Answer: A
NEW QUESTION # 62
You have configured a new MC-LAG connection to a host. After committing the configuration, the MC-LAG link is not functioning properly.
Referring to the exhibit, how would you solve this problem?
- A. Configure a system-id on qfx1 that is different from the system-id on qfx2
- B. Configure status-control on qfx2 to active
- C. Change the mc-ae is on qfx1 to 1
- D. Change the chassis on qfx1 to 1
Answer: C
NEW QUESTION # 63
Site 1 contains 20+ VMs. The link between Site 1 and Leaf1 goes down.
Referring to the exhibit, which statement is correct?
- A. Type-1 routes for all VMs in the site will be withdrawn all at once.
- B. Type-1 routes for all VMs in the site will expire all at once.
- C. Type-1 routes for each VM will be withdrawn one at a time.
- D. Type-1 routes for each VM will expire one at a time.
Answer: A
NEW QUESTION # 64
Referring to the exhibit, what happens when you initiate ZTP on a QFX5120 switch running Junos
21.3R1.9?
- A. ZTP performs the Junos installation but skips the configuration.
- B. ZTP skips the Junos installation but applies the configuration.
- C. ZTP performs both the Junos installation and the configuration.
- D. ZTP skips both the Junos installation and the configuration.
Answer: C
NEW QUESTION # 65
The two data centers shown in the exhibit need to be connected using EVPN.
Which two statements are correct in this situation? (Choose two.)
- A. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 2.
- B. Hosts in VLAN 202 can communicate using Layer 2 between data centers.
- C. Hosts in VLAN 202 can communicate using Layer 3 between data centers.
- D. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 3.
Answer: B,D
NEW QUESTION # 66
You are evaluating which method to use for learning MAC addresses in your VXLAN network.
Which statement is true in this scenario?
- A. Multicast exchanges MAC addresses through data plane learning and is more reliable than EVPN.
- B. EVPN exchanges MAC addresses through control plane learning and is more reliable than multicast.
- C. Multicast exchanges MAC addresses through control plane learning and is not more reliable than EVPN.
- D. EVPN exchanges MAC addresses through data plane learning and is more reliable than multicast.
Answer: B
NEW QUESTION # 67
Referring to the VTEP output shown in the exhibit, which two statements are true? (Choose two.)
- A. The MAC address 52:54:00:2c:4b:a2 belongs to a local host.
- B. The MAC address.52:54:00:5e:88:6a belongs to a local host.
- C. The MAC address 52:54:00:5e:88:6a belongs to a remote host.
- D. The MAC address 52:54:00:2c:4b:a2 belongs to a remote host.
Answer: B,D
Explanation:
Explanation
logical interface is vtep = MAC learned from remote vtep logical interface is local (i.e. xe-0/0/*) = MAC
learned locally via normal bridging
NEW QUESTION # 68
What is the purpose of the command shown in the exhibit?
- A. To disallow IGMP request for the group 239.0.01 from host attached to the local VTEP
- B. To disable the group2390.0.1 across the entire VXLAN.
- C. To stop the transmission of transit multicast traffic when there are no interested receives attached to a
remote VTEP - D. To stop the reception of transit multicast traffic when there are no interested receives attached to the
local VTEP
Answer: C
Explanation:
Explanation
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/sdn-vxlan.html
"no traffic will be forwarded for the specified group but all other multicast traffic will be forwarded"
NEW QUESTION # 69
You are asked to deploy an Ethernet bridging design in a data center with the following criteria:
--routing must occur on the leaf devices.
--VTEPs must terminate on the leaf devices.
--facilitate inter-VLAN communication, -- lower latency with East-West traffic.
Which architecture should you use in this scenario?
- A. centrally-routed bridging architecture
- B. collapsed spine architecture
- C. edge-routed bridging architecture
- D. bridge overlay architecture
Answer: A
NEW QUESTION # 70
You have configured MP-IBGP to support EVPN for your overlay network. However, you are not seeing the expected routes on your edge devices.
Referring to the exhibit, how would you solve this problem?
- A. Graceful restart must be disabled for this session
- B. The group types on both devices should be set to external
- C. The family 12vpn signaling must be configured on the local peer
- D. The family evpn signaling parameter must be configured on the remote peer.
Answer: D
NEW QUESTION # 71
You are considering deploying a MAC-VRF type routing instance with a VLAN-bundle service type. In this scenario, which two statements are correct? (Choose two.)
- A. It can be implemented in a bridge overlay architecture.
- B. It can be implemented in an ERB architecture.
- C. VLAN normalization is supported.
- D. Multiple VLAN IDs per EVI are supported.
Answer: D
NEW QUESTION # 72
Exhibit.
You are troubleshooting a problem with traffic not reaching a remote VTEP Referring to the exhibit, what is the reason for the problem?
- A. No VTEP is configured on peer 192.0.2.20.
- B. A conflict exists with the VLAN-to-VNI mapping.
- C. The remote VTEP does not have the correct VNI configured.
- D. The local VTEP is misconfigured with the wrong VNI.
Answer: C
NEW QUESTION # 73
You are asked to build a single export policy that can be applied to all devices to advertise only loopback IP addresses in the 172.16.0.0/24 subnet into your EBGP IP fabric. In this scenario, which two solutions would accomplish this task? (Choose two.) A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: B,C
NEW QUESTION # 74
Exhibit.
The two data centers shown in the exhibit need to be connected using EVPN.
Which two statements are correct in this situation? (Choose two.)
- A. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 2.
- B. Hosts in VLAN 202 can communicate using Layer 2 between data centers.
- C. Hosts in VLAN 202 can communicate using Layer 3 between data centers.
- D. Hosts in VLAN 10 can communicate with hosts in Data Center 2 using Layer 3.
Answer: B,D
NEW QUESTION # 75
Which two statements about the seamless EVPN-VXLAN stitching interconnect gateways are correct? (Choose two.)
- A. Interconnect gateways will rewrite the route target, route distinguisher. and ESI values for each stretched virtual network.
- B. All EVPN routes types are forwarded among interconnect gateways in a full-mesh manner.
- C. IBGP is recommended for VXLAN stitching overlays.
- D. The interconnect gateway can reside on the super spine layer of a multi-POD data center.
Answer: B,D
NEW QUESTION # 76
......
Juniper JN0-682 certification exam is designed to assess the skills and knowledge of IT professionals working in data center environments. JN0-682 exam is part of the Juniper Networks Certified Professional Data Center (JNCIP-DC) certification track, which provides a comprehensive understanding of data center technologies, including virtualization, automation, and software-defined networking (SDN).
Updated Juniper Study Guide JN0-682 Dumps Questions: https://www.actualcollection.com/JN0-682-exam-questions.html