Latest Jan-2025 350-601 Dumps PDF And Certification Training
Check your preparation for Cisco 350-601 On-Demand Exam
Cisco 350-601 (Implementing Cisco Data Center Core Technologies) certification exam is designed for professionals who wish to demonstrate their skills in implementing and managing complex data center solutions. 350-601 exam tests the candidate's knowledge of technologies and best practices involved in data center design, implementation, and operation. Successful completion of the exam leads to the award of the Cisco Certified Specialist - Data Center Core certification.
NEW QUESTION # 130
An engineer must configure two Cisco Nexus 7000 series switches in the same data center to support OTV. Which command set completes the join interface configuration?
- A. Option A
- B. Option D
- C. Option C
- D. Option B
Answer: A
NEW QUESTION # 131
Refer to the exhibit.
What is the reason the system-fm-vrrp checkpoint was created?
- A. The network administrator manually created it.
- B. The VRRP process crashed and the checkpoint was automatically created.
- C. The VRRP-enable feature has been disabled.
- D. The VRRP service restarted and the checkpoint was automatically created.
Answer: A
Explanation:
The checkpoint named "system-fm-vrrp" was created by an admin, as indicated by the description "Created by Feature Manager." This suggests that it was a deliberate action rather than an automatic response to a service restart or crash. Checkpoints in Cisco systems can be manually created for various reasons, such as before making significant changes to the configuration, which allows for a rollback to a known good state if necessary.
References := For more information on the creation and management of checkpoints in Cisco systems, one should refer to the Cisco Data Center Core Technologies documentation and study materials, which provide detailed procedures and best practices.
NEW QUESTION # 132
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state.
Which open-source tool meets this requirement?
- A. SaltStack
- B. Terraform
- C. Kubernetes
- D. Puppet
Answer: D
Explanation:
The Puppet software package, developed by Puppet Labs, is an open source automation toolset for managing servers and other resources by enforcing device states, such as configuration settings.
Puppet components include a puppet agent which runs on the managed device (node) and a puppet master (server) that typically runs on a separate dedicated server and serves multiple devices. The operation of the puppet agent involves periodically connecting to the puppet master; which in turn compiles and sends a configuration manifest to the agent; the agent reconciles this manifest with the current state of the node and updates state based on differences.
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3548/sw/programmability/6x/b_ Cisco_Nexus_3500_Series_NX- OS_Programmability_Guide_6x/b_Cisco_Nexus_3500_Series_NX- OS_Programmability_Guide_6x_chapter_01000.html
NEW QUESTION # 133
An engineer is duplicating an existing Cisco UCS setup at a new site. What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)
- A. contains all of the configurations
- B. contains the AAA and RBAC configurations
- C. contains the configuration organizations and locales
- D. contains a file with an extension.tgz that stores all of the configurations
- E. contains the VLAN and VSAN configurations
Answer: C,D
Explanation:
A logical configuration backup of a Cisco UCS Manager database is a file that contains all of the configurations that are stored in the Cisco UCS Manager database, such as policies, pools, service profiles, templates, and firmware versions. The file has an extension .tgz and can be created and restored using the Cisco UCS Manager GUI or CLI. A logical configuration backup also contains the configuration organizations and locales, which are logical entities that group and isolate resources within a Cisco UCS domain.
Organizations and locales can be used to delegate administrative tasks and privileges to different users or groups. The other options (AAA and RBAC configurations, VLAN and VSAN configurations) are not part of a logical configuration backup, but rather a full state backup, which is a different type of backup that includes the operational state and statistics of the Cisco UCS domain. References: For more information on how to create and restore a logical configuration backup of a Cisco UCS Manager database, please refer to the following resources:
* Cisco UCS Manager Backup and Restore Management Guide
* Cisco UCS Manager Configuration Common Practices and Quick Start Guide
NEW QUESTION # 134
Which two statements describe modifying Cisco UCS user accounts? (Choose two.)
- A. The password of the user account must contain a minimum of 10 characters.
- B. The password of the user account expires in 30 days.
- C. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.
- D. The admin account is used only to log on by using SSH.
- E. Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.
Answer: C,E
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html
NEW QUESTION # 135
A network engineer must implement a telemetry solution to collect real-time structured data in a large-scale network. Drag and drop the actions from the left into the order on the right to implement the solution. Not all actions are used.
Answer:
Explanation:
NEW QUESTION # 136
A network engineer must prevent data comuption due to cross fabric communication in an FCoE environment.
Which configuration must be applied to the Cisco Nexus Unified Switches to achieve this objective?
- A. Switch(config) # no fcoe fcf-priority
- B. Switch(config)#fcoe fcmap 0e,fc,2a
- C. Switch(config-if) # shutdown lan
- D. Switch(config-if)# no fcoe fcf-priority 0
Answer: B
Explanation:
To prevent data corruption due to cross fabric communication in an FCoE environment, the network engineer must apply the configuration Switch(config)#fcoe fcmap 0e,fc,2a to the Cisco Nexus Unified Switches. This configuration sets the FCoE MAC address prefix (fcmap) to a custom value of 0e,fc,2a, which is different from the default value of 0e,fc,00. The fcmap is used to identify the FCoE traffic and map it to the corresponding Fibre Channel ID (FCID). By using a custom fcmap, the network engineer can avoid the possibility of FCID conflicts or overlaps between different FCoE fabrics, which can cause data corruption or loss. The custom fcmap must be configured on all the switches in the same FCoE fabric, and must be unique across different FCoE fabrics. References :=
* Implementing and Operating Cisco Data Center Core Technologies (DCCOR) v1.2, Module 7: Data Center Storage Connectivity, Lesson 7.4: FCoE Protocol
* Cisco Nexus 9000 Series NX-OS FCoE Configuration Guide, Release 9.3(x), Chapter: Configuring FCoE, Section: Configuring the FCoE MAC Address Prefix
NEW QUESTION # 137
An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics. Which configuration set accomplishes this task?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: B
NEW QUESTION # 138
Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?
- A. aaa authentication none
- B. aaa authentication login default fallback error local
- C. aaa authentication login default group radius
- D. aaa authentication login default group local
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6- x/security/configuration/guide/b_Cisco_Nexus_9000_Series_NX- OS_Security_Configuration_Guide/b_Cisco_Nexus_9000_Series_NX- OS_Security_Configuration_Guide_chapter_0111.html
NEW QUESTION # 139
An engineer must affirm the identity of the Cisco UCS Manager after a valid CA-signed keyring for HTTPS access is created. Which action completes the configuration?
- A. Enable TLSv1.2
- B. Create a trusted point
- C. Implement SSLv3
- D. Set Cipher Suite Mode
Answer: B
Explanation:
After creating a CA-signed keyring for HTTPS access in Cisco UCS Manager, the next step is to create a trusted point. This action associates the keyring with a certificate and designates the certification authority (CA) that will be recognized as valid for the system
NEW QUESTION # 140 
Refer to the exhibit. An engineer is troubleshooting intermittent connectivity issues between the client PC and the DHCP server. What does the last package captured from the Cisco Nexus 2000 Series Switch indicate?
- A. The DHCP server sends an IP address via a broadcast message.
- B. The client sends a unicast message to receive an IP address from the DCHP server.
- C. The DCHP server releases the IP address from the client.
- D. The client receives an IP address from the DHCP server.
Answer: C
Explanation:
The last packet indicates a DHCP Release message, which is sent by the client to the DHCP server to release the assigned IP address. This is typically done when the client no longer requires the IP address, or before the client shuts down to ensure the IP address can be reassigned. The packet capture showing a DHCP Release message confirms that the client is informing the DHCP server that it is releasing its current IP address.
References := For further understanding of DHCP operations and troubleshooting connectivity issues, the Cisco Data Center Core Technologies source book provides detailed explanations. Additionally, Cisco's official documentation and resources on their website offer extensive guidance on managing and troubleshooting DHCP in Cisco environments. These materials are essential for network engineers working with Cisco Nexus series switches and dealing with DHCP-related issues.
NEW QUESTION # 141
Refer to the exhibit.
A host with a source address 10.10.10.10 sends traffic to multicast group 239.1.1.1. How do the vPC switches forward the multicast traffic?
- A. If multicast traffic is received on Switch1 over the vPC peer-link, the traffic is dropped
- B. If multicast traffic is received on Po11 Switch2, the traffic is forwarded out only on Po20
- C. If multicast traffic is received on Po10 Switch1, the traffic is forwarded out on Po1 and Po20
- D. If multicast traffic is received on Po11 Switch2, the traffic is dropped.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/support/docs/ip/multicast/214140-multicast-forwarding-in-vpc-based-on-loc.html
NEW QUESTION # 142
Refer to the exhibit.
An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails Which action accomplishes this objective?
- A. Configure the eight uplinks in a port channel
- B. Set the pinning max-links value to 8
- C. Statically assign each host interface to a fabric uplink
- D. Change the supported FEX type
Answer: A
Explanation:
Traffic disruption should be minimised when an uplink fails. If pinning was used and an uplink failed, then traffic associated with the failed link would be disrupted until it could be re-routed. Using a port-channel is much less disruptive.
NEW QUESTION # 143 
Refer to the exhibit. An engineer must configure FCoE between the N9K-A switch and the FCF-A Nexus
9000 core switch. The deployment has these characteristics:
* The N9K-Aand N9K-B top-of-rack switches share the domain ID of the core switches.
* The hosts are equipped with converged network adapters.
* The only VSAN that is permitted to traverse port-channel 100 is VSAN 20.
Which configuration completes the FCoE configuration on the N9K-A device?
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 144 
Refer to the exhibit. An engineer is creating a SPAN session to send a copy of all the Fabric-A VSAN 11 traffic on NSK_1 to the monitoring laptop. The configurator that is presented has already been applied to Cisco UCS Manager. Which action completes the configuration?
- A. Create a SAN traffic rnonitoring session
- B. Set VLAN 11 as the traffic destination
- C. Activate a NetFlow monitoring session
- D. Select VSAN 11 as the source of traffic.
Answer: B
NEW QUESTION # 145
An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch. Which utility should be used?
- A. Guest Shell for NX-OS
- B. NX-OS JSON-RPC
- C. NX-API Sandbox
- D. Open NX-OS
Answer: C
Explanation:
Section: Automation
Explanation/Reference:
https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox
NEW QUESTION # 146
An engineer must create a new Cisco UCS user account to perform these actions:
* Modify systems logs, faults, and power management settings.
* View access to all other configuration in the UCS domain.
Which two roles must be assigned to the user to permit these actions? (Choose two.)
- A. Administrator
- B. Server Compute
- C. Facility Manager
- D. Read-Only
- E. Operations
Answer: C,E
NEW QUESTION # 147
An engineer must generate a checkpoint of the running configuration on a Cisco Nexus Switch. The checkpoint file name must be called "before_maintenance' and should be used for recovering the switch to its pre-maintenance state. The rollback of the checkpoint to running configuration should only occur if no errors occur. Which two configuration commands must be used to meet these requirements? (Choose two.)
- A. rollback checkpoint file before_maintenance stop-at-first-failure
- B. checkpoint file before_maintenance
- C. rollback running-config checkpoint before_maintenance
- D. rollback running-config file before_maintenance atomic
- E. checkpoint before_maintenance
Answer: B,D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/command/reference/security/n5k-sec-c rollback checkpoint is invalid command. Rollback should be to running configuration, not a checkpoint rollback can be selected by a name or file name. the difference between them is using the "file" keyword.
NEW QUESTION # 148
What is a characteristic of the NFS protocol?
- A. It uses remote procedure calls with TCP/IP for transport.
- B. It uses UDP and HTTP as its transport.
- C. It is used to access a storage array at a block level.
- D. It is used tor booting Cisco UCS B-Series servers.
Answer: A
Explanation:
When a client wants to perform some type of action on a file on a particular machine, it uses RPC to make a call to the NFS server on that machine. The server accepts the request and performs the action required, then returns a result code and possibly data back to the client, depending on the request. The result code indicates if the action was successful. If it was, the client can assume that whatever it asked to be done was completed. For example, in the case of writing data, the client can assume the data has been successfully written to long-term storage.
NFS can operate over any transport mechanism that has a valid RPC implementation at the session layer.
NEW QUESTION # 149
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. What configuration should be applied to an MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?
- A. fcoe fcf-priority 1024
- B. no fcoe fcf-priority
- C. fcoe fcf-priority 512
- D. fcoe fcf-priority 0
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/fcoe/521n11/b_5k_FCoE_Config_521N11/ b_5k_FCoE_Config_521N11_chapter_011.pdf
NEW QUESTION # 150
An engineer must add a new VRF (DC DC) to the network that runs with Multiprotocol Border Gateway Protocol (MP-BGP) and EVPN.The requirement for the new VRF is to allow communication of network prefixes between PE1 and PE2. Which two sets of steps should be taken to complete the VRF configuration?
(Choose two)
- A. Option D
- B. Option C
- C. Option B
- D. Option E
- E. Option A
Answer: A,D
NEW QUESTION # 151
A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?
- A. Modify the privilege level assigned to the user
- B. Assign users to a specific Cisco UCS locale
- C. Assign the user "Employee1" the network-operator role
- D. Define a custom user role and assign it to users
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User- Guides/Admin-Management/3-
1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html
NEW QUESTION # 152
......
Cisco 350-601 certification exam is designed to test the knowledge and skills of professionals who want to implement data center technologies. 350-601 exam covers a wide range of topics such as network design, virtualization, automation, and security. Candidates who pass 350-601 exam will demonstrate their ability to plan, implement, and troubleshoot complex data center solutions using Cisco technologies.
Another important aspect of the Cisco 350-601 Exam is testing an individual's knowledge of data center storage technologies. This includes understanding the different types of storage technologies, such as block, file, and object storage, as well as the various storage protocols and technologies used in data center storage, including Fibre Channel (FC), Network File System (NFS), and Storage Area Network (SAN).
Valid 350-601 Dumps for Helping Passing Cisco Exam: https://www.actualcollection.com/350-601-exam-questions.html
Practice Exam 350-601 Realistic Dumps Verified Questions: https://drive.google.com/open?id=1hVTj_sB1lfbRZ3xKrOR87uC3kw-bnwT3