[Nov 12, 2021] 300-715 PDF Recently Updated Questions Dumps to Improve Exam Score
300-715 Dumps Full Questions with Free PDF Questions to Pass
NEW QUESTION 35
What is the deployment mode when two Cisco ISE nodes are configured in an environment?
- A. active
- B. standard
- C. standalone
- D. distributed
Answer: D
NEW QUESTION 36
A new employee just connected their workstation to a Cisco IP phone. The network administrator wants to ensure that the Cisco IP phone remains online when the user disconnects their Workstation from the corporate network Which CoA configuration meets this requirement?
- A. NoCoA
- B. Port Bounce
- C. Reauth
- D. Disconnect
Answer: A
NEW QUESTION 37
A laptop was stolen and a network engineer added it to the block list endpoint identity group What must be done on a new Cisco ISE deployment to redirect the laptop and restrict access?
- A. Ensure that access to port 8444 is allowed within the ACL.
- B. Select DROP under If Auth fail within the authentication policy.
- C. Select DenyAccess within the authorization policy.
- D. Ensure that access to port 8443 is allowed within the ACL.
Answer: A
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_010000.html
NEW QUESTION 38
When planning for the deployment of Cisco ISE, an organization's security policy dictates that they must use network access authentication via RADIUS. It also states that the deployment needs to provide an adequate amount of security and visibility for the hosts on the network.
Why should the engineer configure MAB in this situation?
- A. MAB provides user authentication.
- B. The Cisco switches only support MAB.
- C. The devices in the network do not have a supplicant.
- D. MAB provides the strongest form of authentication available.
Answer: C
Explanation:
Section: Endpoint Compliance
NEW QUESTION 39
An administrator is configuring posture with Cisco ISE and wants to check that specific services are present on the workstations that are attempting to access the network. What must be configured to accomplish this goal?
- A. Create a compound posture condition using a OPSWAT API version.
- B. Create a registry posture condition using a non-OPSWAT API version.
- C. Create an application posture condition using a OPSWAT API version.
- D. Create a service posture condition using a non-OPSWAT API version.
Answer: B
NEW QUESTION 40
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION 41
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. RADIUS
- B. DHCP
- C. HTTP
- D. SNMP
- E. NetFlow
Answer: A,B
Explanation:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-
1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION 42
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Enter the IP address of the device
- B. Enter the common name
- C. Select the certificate template
- D. Location the CSV file for the device MAC
- E. Choose the hashing method
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0- Certificate-Provisioning-Portal.html
NEW QUESTION 43
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8909
- B. TCP 8905
- C. UDP 1812
- D. TCP 443
Answer: A
Explanation:
Section: Endpoint Compliance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010101.html
NEW QUESTION 44
Which two features should be used on Cisco ISE to enable the TACACS+ feature? (Choose two )
- A. Device Administration License
- B. Server Sequence
- C. Command Sets
- D. External TACACS Servers
- E. Device Admin Service
Answer: A,E
NEW QUESTION 45
An organization wants to implement 802.1X and is debating whether to use PEAP-MSCHAPv2 or PEAP-EAP-TLS for authentication. Drag the characteristics on the left to the corresponding protocol on the right.
Answer:
Explanation:
NEW QUESTION 46
When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2. Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)
- A. SNMP query probe
- B. DNS probe
- C. DHCP SPAN probe
- D. RADIUS probe
- E. NetFlow probe
Answer: A,D
Explanation:
https://ciscocustomer.lookbookhq.com/iseguidedjourney/ISE-profiling-design
NEW QUESTION 47
What is a requirement for Feed Service to work?
- A. TCP port 3080 must be opened between Cisco ISE and the feed server
- B. Cisco ISE has Internet access to download feed update
- C. Cisco ISE has a base license.
- D. Cisco ISE has access to an internal server to download feed update
Answer: D
NEW QUESTION 48
Which permission is common to the Active Directory Join and Leave operations?
- A. Set attributes on the Cisco ISE machine account
- B. Remove the Cisco ISE machine account from the domain.
- C. Search Active Directory to see if a Cisco ISE machine account already ex.sts.
- D. Create a Cisco ISE machine account in the domain if the machine account does not already exist
Answer: C
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-0/ise_active_directory_integration/b_ISE_AD_integration_
NEW QUESTION 49
A user reports that the RADIUS accounting packets are not being seen on the Cisco ISE server.
Which command is the user missing in the switch's configuration?
- A. aaa accounting exec default start-stop group radios
- B. aaa accounting resource default start-stop group radius
- C. aaa accounting network default start-stop group radius
- D. radius-server vsa send accounting
Answer: D
NEW QUESTION 50
An administrator is configuring posture with Cisco ISE and wants to check that specific services are present on the workstations that are attempting to access the network. What must be configured to accomplish this goal?
- A. Create a service posture condition using a non-OPSWAT API version.
- B. Create a compound posture condition using a OPSWAT API version.
- C. Create a registry posture condition using a non-OPSWAT API version.
- D. Create an application posture condition using a OPSWAT API version.
Answer: A
NEW QUESTION 51
An administrator needs to give the same level of access to the network devices when users are logging into them using TACACS+ However, the administrator must restrict certain commands based on one of three user roles that require different commands How is this accomplished without creating too many objects using Cisco ISE?
- A. Create multiple shell profiles and one command set
- B. Create one shell profile and multiple command sets.
- C. Create one shell profile and one command set.
- D. Create multiple shell profiles and multiple command sets.
Answer: D
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_0100010.html
https://www.youtube.com/watch?v=IlZwB71Szog&ab_channel=JasonMaynard
NEW QUESTION 52
Refer to the exhibit:
Which command is typed within the CU of a switch to view the troubleshooting output?
- A. show authentication sessions mac 000e.84af.59af details
- B. show authentication registrations
- C. show authentication interface gigabitethemet2/0/36
- D. show authentication sessions method
Answer: A
NEW QUESTION 53
An engineer is configuring a dedicated SSID for onboarding devices. Which SSID type accomplishes this configuration?
- A. hidden
- B. guest
- C. broadcast
- D. dual
Answer: B
NEW QUESTION 54
What are the three default behaviors of Cisco ISE with respect to authentication, when a user connects to a switch that is configured for 802.1X, MAB, and WebAuth? (Choose three)
- A. MAB traffic uses internal endpoints for retrieving identity.
- B. Unmatched traffic is dropped because of the Reject/Reject/Drop action that is configured under Options.
- C. Dot1 traffic uses internal users for retrieving identity.
- D. Dot1X traffic uses a user-defined identity store for retrieving identity.
- E. Unmatched traffic is allowed on the network.
Answer: A,B,C
NEW QUESTION 55
A network administrator has just added a front desk receptionist account to the Cisco ISE Guest Service sponsor group.
Using the Cisco ISE Guest Sponsor Portal, which guest services can the receptionist provide?
- A. Authenticate guest users to Cisco ISE
- B. Keep track of guest user activities
- C. Configure authorization settings for guest users
- D. Create and manage guest user accounts
Answer: C
NEW QUESTION 56
......
Career Prospects and Salary Outlook
Completing the Cisco 300-715 exam and obtaining one of the associated certificates gives you vast opportunities for your career advancement. After passing this test, you will have the solid knowledge and skills required for performing various network security tasks. Some of the job roles that are available to the successful candidates as well as the annual salary rates related to them are as follows:
- Development Operations (DevOps) Engineer – $110,000
- Technical Specialist – $81,000
- Network Engineer – $119,000
- Systems Engineer (Computer Networking/IT) – $60,000
- Network Security Engineer – $105,000
- Software Engineer/Developer/Programmer – $154,000
- Network Manager – $131,000
- Network Specialist – $85,000
- Senior Technical Consultant – $140,000
- Project Manager, Information Technology (IT) – $35,000
- Program Manager, Software Applications – $145,000
- Senior Systems Engineer – $106,000
- Security Consultant, (Computing/Networking/Information Technology) – $160,000
- Network Engineer – $83,000
Your exact remuneration will depend on numerous factors such as your previous professional background, location, the organization you work for, specific job title, among others. Anyway, with the certifications earned through passing the Cisco 300-715 exam, you stand a better chance of landing a prestigious and well-paying job in the security field.
100% Updated Cisco 300-715 Enterprise PDF Dumps: https://www.actualcollection.com/300-715-exam-questions.html
Free CCNP Security 300-715 Official Cert Guide PDF Download: https://drive.google.com/open?id=1DguUNSYiLrqqbuZZqQcK_AutIfypWsVh