[Oct 27, 2024] 201 Practice Exam Dumps - 99% Marks In F5 Exam
Updated Verified 201 Q&As - Pass Guarantee or Full Refund
F5 201 (BIG-IP Administrator) Exam is a certification exam designed for IT professionals who specialize in the deployment and administration of F5 BIG-IP Application Delivery Controllers (ADCs). 201 exam is focused on testing the candidate's knowledge and skills in the areas of installation, configuration, management, and troubleshooting of BIG-IP systems. Passing 201 exam is a crucial step towards becoming a certified F5 BIG-IP Administrator.
F5 201 Certification Exam is an industry-recognized certification that demonstrates an individual’s proficiency in managing and maintaining F5 BIG-IP products. BIG-IP Administrator Exam certification is highly valued by employers, as it validates the skills and knowledge required to work with F5 BIG-IP products effectively. Candidates who pass the F5 201 Certification Exam are considered to be experts in the field and are highly sought after by employers.
NEW QUESTION # 35
A BIG-IP Administrator needs to collect HTTP status code and HTTP method for traffic flowing through a virtual server.
Which default profile provides this information?
- A. HTTP
- B. Analytics
- C. Request Adapt
- D. Statistics
Answer: A
NEW QUESTION # 36
Refer to the exhibit.
The BIG-IP Administrator is investigating disk utilization on the BIG-IP device.
What should the BIG-IP Administrator check next?
- A. Results from the platform diagnostics test
- B. Large files on the / file system
- C. Results from the EUD test
- D. Large files on /usr file system
Answer: B
NEW QUESTION # 37
Assuming there are open connections through an active system's virtual servers and aEl fo av ielr occurs, by default, what happens to the connections.
- A. LongEllived connections such as Telnet and FTP are maintained,
but shortEllived connections such as HTTP are lost. - B. When persistence mirroring is enabled, open connections are maintained even if a fEl aoilver occurs.
- C. All open connections are lost, but new connections are initiated by the newly active BIGElIP, resulting in minimal client downtime.
- D. All open connections are maintained.
- E. All open connections are lost.
Answer: E
NEW QUESTION # 38
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server to load balance SSH traffic. Users are unable to log on to the servers.
What should the BIG-IP Administrator do to resolve the issue?
- A. Set Protocol to UDP
- B. Set Destination Addresses/Mask to 0.0.0.0/0
- C. Set HTTP Profile to None
- D. Set Source Address to 10.1.1.2
Answer: C
NEW QUESTION # 39
A BIGElIP has a virtual server at 150.150.10.10:80 with SNAT automap configured. This BIGElIP also has a SNAT at 150.150.10.11 set for a source address range of 200.200.1.0 / 255.255.255.0. All other settings are at their default states. If a client with the IP address 200.200.1.1 sends a request to the virtual server, what is the source IP address when the associated packet is sent to the pool member.
- A. 150.150.10.11
- B. 200.200.1.1
- C. Floating self IP address on VLAN where the packet leaves the system
- D. Floating self IP address on VLAN where the packet arrives on the system
Answer: C
NEW QUESTION # 40
An ecommerce company is experiencing latency issues with online shops during Black Friday's peak season.
The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device.
Where should the BIG-IP Administrator determine the problematic Virtual Servers?
- A. Local Traffic > Network Map
- B. Statistics > Module Statistics > Local Traffic > Virtual Servers
- C. Local Traffic > Virtual Servers > Virtual Server List
- D. System > Plattform
Answer: B
NEW QUESTION # 41 
A BIG-IP Administrator notices that one of the servers that runs an application is NOT receiving any traffic.
The BIG-IP Administrator examines the configuration status of the application and observes the displayed monitor configuration and affected Pool Member status. What is the possible cause of this issue?
- A. The Node Health Monitor is NOT responding.
- B. HTTP 1.1 is NOT appropriate for monitoring purposes.
- C. The application is NOT responding with the expected Receive String.
- D. The BIG-IP device is NOT able to reach the Pool.
Answer: A
NEW QUESTION # 42
Refer to the exhibit.
An organization is reporting slow performance accessing their Intranet website, hosted in a public cloud. All employees use a single Proxy Server with the public IP of 104.219.110.168 to connect to the Internet. What should the BIG-IP Administrator of the Intranet website do to fix this issue?
- A. Change Source Address to 104.219.110.168/32
- B. Change Fallback Persistence Profile to source_addr
- C. Change Load Balancing Method to Least Connection
- D. Change Default Persistence Profile to cookie
Answer: D
NEW QUESTION # 43
A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They assigned the A site would like to ensure that a given web server's default page is being served correctly prior to sending it client traffic. They.e assigned the default HTTP monitor to the pool. What would the member status be if it sent an unexpected response to the GET request. default HTTP monitor to the pool. What would the member. status be if it sent an unexpected response to the GET request.
- A. The pool member would be marked unknown (blue).
- B. The pool member would be marked online (green).
- C. The pool member would alternate between red and green.
- D. The pool member would be marked offline (red).
Answer: B
NEW QUESTION # 44
A BIG-IP Administrator needs to apply a health monitor for a pool of database servers named DB_Pool that uses TCP port 1521.
Where should the BIG-IP Administrator apply this monitor?
- A. Local Traffic > Profiles > Protocol > TCP
- B. Local Traffic > Pools > DB Pool > Properties
- C. Local Traffic > Pools > De Pool > Members
- D. Local Traffic > Nodes > Default Monitor
Answer: B
NEW QUESTION # 45
Which cookie persistence method requires the fewest configuration changes on the web servers to be implemented correctly.
- A. rewrite
- B. session
- C. passive
- D. insert
Answer: D
NEW QUESTION # 46
Which statement is true about the synchronization process, as performed by the Configuration Utility or by typing b config sync all.
- A. Multiple files,
including
/config/bigip.conf and
/config/bigip_base.conf,
are synchronized (made identical) each time the process is run. - B. The two /config/bigip.conf configuration files are synchronized (made identical) each time the process is run.
- C. The process should always be run from the system with the latest configuration.
- D. The process should always be run from the standby system.
Answer: B
NEW QUESTION # 47
Refer to the exhibit.
A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?
- A. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
- B. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers
- C. Set Address Translation to SNAT and configure a specific translation address
- D. Disable Address Translation
Answer: C
Explanation:
Explanation
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.
NEW QUESTION # 48
The current status of a given pool is offline (red). Which condition could explain that state? Assume the descriptions below include all monitors assigned for each scenario.
- A. No monitors are currently assigned to any pool, member or node.
- B. The pool has a monitor assigned to it, and none of the pool members passed the test.
- C. The pool has a monitor assigned to it, and only some of the pool's members passed the test.
- D. A monitor is assigned to all nodes and all nodes have passed the test. The pool's members have no specific monitor assigned to them.
Answer: B
NEW QUESTION # 49
A BIG-IP Administrator uses a device group to share the workload and needs to perform service on a BIG-IP device currently active for a traffic group. The administrator needs to enable the traffic group to run on another BIG-IP device in the device group. What should the administrator do to meet the requirement?
- A. Create a new Traffic Group and then fail to Standby Unit
- B. Select Traffic Group on Primary Unit and then select Demote
- C. Select Traffic Group and then select Force to Standby
- D. Select Traffic Group and then select Failover
Answer: C
NEW QUESTION # 50
Which two statements are true concerning the default communication between a redundant pair of BIGElIP systems. (Choose two.)
- A. Connection mirroring data is shared through the serial faiEl lover cable unless network failElover is enabled.
- B. Connection mirroring data is shared via a TCP connection using port 1028.
- C. Persistence mirroring data is shared via a TCP connection using port 1028.
- D. Synchronization occurs via a TCP connection using ports 683 and 684.
Answer: B,C
NEW QUESTION # 51
......
F5 201 certification exam covers a wide range of topics, including network topologies, VLANs, routing protocols, and load balancing algorithms. It also covers security concepts such as SSL/TLS, IPsec, and authentication protocols. Additionally, the exam tests candidates' knowledge of application delivery concepts, including virtual servers, pools, profiles, and iRules.
201 Real Valid Brain Dumps With 255 Questions: https://www.actualcollection.com/201-exam-questions.html
201 Certification with Actual Questions: https://drive.google.com/open?id=1NWxRVZF08spF1J-DkrKwB0pXNZNefll0