Latest Nokia BL0-100 First Attempt, Exam real Dumps Updated [Nov-2021]
Get the superior quality BL0-100 Dumps Questions from ActualCollection. Nobody can stop you from getting to your dreams now. Your bright future is just a click away!
NEW QUESTION 23
What does the acronym SOAR stand for?
- A. Security Orchestration Automation and Response
- B. Security Optimization Accountability Recovery
- C. Securitization, Optimization, Access Control, and Resiliency
- D. Security Orchestration Automation and Recovery
Answer: A
Explanation:
Explanation/Reference: https://www.fireeye.com/products/helix/what-is-soar.html
NEW QUESTION 24
Resource elasticity in Cloud enables which of the following actions? (Choose two.)
- A. Add resources to existing VMs when traffic is high.
- B. Relocate VMs between data centers when a fault is detected.
- C. Deploy VMs across data centers when a new slice is needed.
- D. Add VMs when traffic is high.
Answer: B,D
NEW QUESTION 25
Is it possible for a User Equipment to connect simultaneously to multiple slices in 5G?
- A. No
- B. Yes
Answer: B
NEW QUESTION 26
Which of the following drive 5G higher reliability?
- A. Higher spectral efficiency
- B. Multi-connectivity per User Equipment
- C. Connectionless radio access
- D. Lower Time Transmission Interval (TTI)
Answer: A
NEW QUESTION 27
Which of the following are 4G limitations that justify a roll-out to 5G? (Choose three.)
- A. Low reliability
- B. Beamforming is not supported
- C. High latency
- D. Low peak and end-user-experience throughput
Answer: A,C,D
Explanation:
Explanation/Reference: https://www.raconteur.net/technology/5g/4g-vs-5g-mobile-technology/
NEW QUESTION 28
What is the maximum distance of an Edge Cloud from end-user?
- A. 300 KM
- B. 10,000 KM
- C. 5,000 KM
- D. 1,000 KM
Answer: D
NEW QUESTION 29
What is the "sweet spot" for Industry 4.0?
- A. The "sweet spot" for industry 4.0 is the intersection of URLLC, eMBB and mMTC.
- B. The "sweet spot" for industry 4.0 is a double-digit revenue growth.
- C. The "sweet spot" for industry 4.0 is a deployment strategy for delivering the required capacity and coverage for industrials.
- D. The "sweet spot" for industry 4.0 is the intersection of operational, information and communications technologies.
Answer: D
Explanation:
Explanation/Reference:
NEW QUESTION 30
Which of the following are 4G limitations that justify a roll-out to 5G? (Choose three.)
- A. Low reliability
- B. Beamforming is not supported
- C. High latency
- D. Low peak and end-user-experience throughput
Answer: A,C,D
NEW QUESTION 31
A company is planning to offer services to different cities worldwide so drones can be used to scan disaster areas to help identify victims' locations quickly, organize evacuations efficiently, and save lives. Drones will be connected to a 5G network. The company is planning to offer two applications running in the cloud - one to manage drones through remote control while the other offers live video streaming to drone operators. As a 5G professional, you are asked what are the network requirements for those two applications?
- A. The drone control application needs low latency and high reliability from the network and should run in the edge cloud. The video application needs higher throughput but it is not sensitive from the latency and reliability point of view. It can run in a central cloud.
- B. Both applications should run in the edge cloud because the drone control and video applications both require low latency and high reliability from the network.
- C. The drone control application should run through a central cloud. The video streaming application should run in the edge cloud because it carries much data, and that is expensive to run through the central cloud.
- D. The drone control application needs very low latency to maneuver around obstacles, while the video application would need less latency. Both applications would be running in the central cloud.
Answer: A
NEW QUESTION 32
What is Unified Data Management (UDM)?
- A. This network function stores or retrieves subscriptions, profiles and authentication data to or from the data repositories. It offers services to the AMF, SMF, NEF and AUSF using the Service Based Interface.
- B. This network function is part of data repositories in the Common Data Layer and in opposition to the UDR, it stores non-standardized unstructured data.
- C. This network function provides registration and discovery functionality to enable other network functions/ services to discover and communicate with each other.
- D. This network function supports authentication for 3GPP and non-3GPP accesses.
Answer: D
Explanation:
Explanation/Reference: https://docs.oracle.com/communications/F25434_01/docs.10/UDM%20User%27s%20Guide/GUID- F0678B8F-501C-4BE5-A0D7-141CED2DFE70.htm
NEW QUESTION 33
What does 5G bring to Industry 4.0? (Choose two.)
- A. 5G will generate a huge amount of data with mMTC and IT platforms are expected to suffer from this.
- B. 5G will generate a huge amount of data and Information Technology will provide the computing platform with analytics and AI.
- C. 5G brings nothing to Industry 4.0.
- D. 5G provides the connectivity (bandwidth, latency and reliability) needed to exchange data for OT and IT functionality.
Answer: B,D
NEW QUESTION 34
Which of the following best defines what is meant by Network Slice isolation?
- A. Resource + Traffic isolation
- B. Resource + Security isolation
- C. Security + Cloud isolation
- D. Transport + Cloud isolation
Answer: B
NEW QUESTION 35
What does 5G bring to Industry 4.0? (Choose two.)
- A. 5G will generate a huge amount of data with mMTC and IT platforms are expected to suffer from this.
- B. 5G will generate a huge amount of data and Information Technology will provide the computing platform with analytics and AI.
- C. 5G brings nothing to Industry 4.0.
- D. 5G provides the connectivity (bandwidth, latency and reliability) needed to exchange data for OT and IT functionality.
Answer: B,D
Explanation:
Explanation/Reference: https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=&ved=2ahUKEwij3MSz5eTvAhUUQEEAHVYtAJkQFjAAegQIAxAD&u rl=https%3A%2F%2Fwww.mdpi.com%2F2673-4001%2F1%2F1%2F5%2Fpdf&usg=AOvVaw2pcA- zrM3BgCPfsBYztcsA
NEW QUESTION 36
What functionality is applied by SDN to find an alternative path in case of failure in the Transport Network?
- A. Path Correlation Engine
- B. Path Computation Engine
- C. Alternative Path Computing
- D. Alternative Route Finding
Answer: C
NEW QUESTION 37
Which one of the following requires a network service package defined in a catalog?
- A. Software defined network
- B. Cloud infrastructure software
- C. Cloud software platform
- D. Cloud orchestration
Answer: D
NEW QUESTION 38
Which of the following statements about Network Slicing are correct? (Choose three.)
- A. Specific resources can be allocated to a given slice.
- B. Multiple slices create multiple virtual network instances.
- C. Unique Quality of Service can be allocated to a given slice.
- D. Network Slicing is a way to physically partition the common network infrastructure.
Answer: A,B,C
NEW QUESTION 39
What are the benefits of traffic engineering in Transport networks? (Choose three.)
- A. Traffic steering
- B. Resiliency
- C. Better utilization of network capacity
- D. Scaling access points
Answer: A,B,C
NEW QUESTION 40
Imagine that you are defining the 5G network requirements for the Industrial Automation of a port, what is the set of 5G technology enablers and horizontal applications that makes sense?
- A. Automation of cargo handling and integration with the logistics chain is an Autonomous Container Transport vehicles that requires 5G NR, Edge cloud and High SLA slices.
- B. Automation of cargo handling and integration with shorter ship turnaround times through improved predictability of operations is a video inspection system of important large infrastructure that requires
5G NR and central cloud. - C. Automation of cargo handling and integration with the logistics chain is an Autonomous Container Transport vehicles that requires 5G NR, central cloud and FWA.
- D. Automation of cargo handling and integration with shorter ship turnaround times through improved predictability of operations is a video inspection system of important large infrastructure that requires
5G NR, FWA and High SLA slices.
Answer: A
NEW QUESTION 41
You and a colleague are discussing the challenges to be resolved in order to make digitization and automation a reality in all industries. He is arguing that the solution is to have faster access connectivity, but you don't agree. You are trying to convince him of the need for an end-to-end solution. The new 5G network should be built end-to-end to enable industries' quest for value. What arguments can you provide to support your position?
- A. Increasing throughput is not enough. A faster and automated transport network, a distributed cloud where applications would run depending on their latency and reliability requirements, a core network that automatically handles any type of access, and a security framework to guarantee the security in every layer of the network are also needed.
- B. Increasing the throughput is enough. There is no need to change the network end-to-end.
- C. Increasing the access throughput might be worthwhile but applications that support a higher bit rate should also be a consideration.
- D. The network consists of many layers that include access, transport, core, cloud, and all of the applications running in the cloud. Increasing throughput in access is not enough. The bit rate needs to be increased in all of the other layers as well.
Answer: A
NEW QUESTION 42
What are the benefits of the stateless or state-efficient aspects of network functions?
- A. Avoid massive database corruption
- B. Enable scalability and extreme resiliency in the 5G Core
- C. Ensure the database integrity
- D. Provide real time access to the databases
Answer: B
NEW QUESTION 43
......
Guaranteed Success with Valid Nokia BL0-100 Dumps: https://www.actualcollection.com/BL0-100-exam-questions.html