010-151 Certification - The Ultimate Guide [Updated 2021]
010-151 Practice Exam and Study Guides - Verified By ActualCollection
Now, what are the objectives of 010-151 exam training? At the end of learning, one should have captured the following:
- A clear demonstration of efficient management and equipment replacement, in addition to the procedure concerning troubleshooting of common challenges experienced by servers for Cisco UCS.
- Abilities in applying the knowledge of networking fundamentals for the data center, which include SAN, fabric for unified computing, server options, and UTP (unshielded twisted-pair);
- Capabilities in identifying component models for Cisco UCS, Cisco Nexus as well as MDS switches, cabling, accessories, and interfaces;
- Skills in utilizing Cisco GUI for handling connection and servicing of the product components for Cisco UCS;
- Ability to comprehend Cisco UCS as well as NX-OS (Nexus-OS) operation modes in addition to identifying frequently available software;
NEW QUESTION 73
Which statement is true about cloud computing?
- A. Users usually own and maintain their own IT infrastructure and facility.
- B. It increases total cost of ownership.
- C. It provides self-service, on-demand provisioning and a billing for corporate usage only.
- D. It provides end-to-end server, application network service, and storage virtualization.
Answer: D
NEW QUESTION 74
Which Cisco NX-OS command displays kernel uptime?
- A. show version
- B. show module
- C. show interface
- D. show license
- E. show boot
Answer: A
NEW QUESTION 75
Which three troubleshooting procedures do you perform when there is no power to a Cisco UCS B250 M2 Blade Server? (Choose three.)
- A. Check the CPU sockets for bent pins.
- B. Reseat the memory DIMMs.
- C. Decommission and acknowledge the blade.
- D. Check the back of the blade to ensure that there is no damage to the connection that goes into chassis.
- E. Reseat the blade in the same slot in the chassis.
- F. Move the blade to another slot in the chassis.
Answer: D,E,F
NEW QUESTION 76
Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt "switch(boot) #"?
- A. configure terminal -> admin-password <password>
- B. exec -> admin-password <password>
- C. connect local-mgmt -> admin-password <password>
- D. connect nxos -> admin-password <password>
- E. admin-password <password>
Answer: A
NEW QUESTION 77
Refer to the exhibit.
Which item does F represent?
- A. HDD 1
- B. CPU 2
- C. CMOS Battery
- D. SuperCap Module
- E. TFP Module
Answer: B
NEW QUESTION 78
Drag the password recovery procedures on a Cisco NX-OS switch from the left to the right and place them in order.
Select and Place:
Answer:
Explanation:
NEW QUESTION 79 
Refer to the exhibit. Match the Fault Icons to the appropriate description.
Answer:
Explanation:
NEW QUESTION 80
How many wires does each PCle lane have?
- A. Sixteen
- B. Two
- C. Eight
- D. Four
Answer: D
NEW QUESTION 81
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?
- A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
- B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
- C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
- D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280
Answer: C
Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system- adapters/datasheet-c78-741130.html
NEW QUESTION 82
Refer to the exhibit.
What item does 6 represent?
- A. Trusted platform module (TPM) socket
- B. RTC battery CR2032 socket
- C. RAID supercap connector
- D. Mezzanine-style connector for optional I/O expander module
Answer: D
NEW QUESTION 83
Refer to the exhibit.
Which item does F represent?
- A. HDD 1
- B. CPU 2
- C. CMOS Battery
- D. SuperCap Module
- E. TFP Module
Answer: B
NEW QUESTION 84
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
- A. Reseat the mezzanine card connector.
- B. Verify the power source to the equipment.
- C. Check the Cisco IMC for fan faults.
- D. Check for loose HDD cables.
- E. Reseat the DIMMs, CPU, and PCI cards.
- F. Verify that power supplies are receiving power.
- G. Check the CPU sockets for bent pins.
Answer: B,E,F,G
NEW QUESTION 85
What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
- A. Servers Tab > Chassis > Server 3 General tab
- B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
- C. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- D. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
- E. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
- F. Status Tab > Chassis > Chassis 1 > Servers > Server 3
Answer: E
NEW QUESTION 86
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?
- A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
- B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
- C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
- D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280
Answer: C
NEW QUESTION 87
Which two cable types can support 10Gbps speed? (Choose two.)
- A. CAT5a
- B. CAT6a
- C. CAT5
- D. CAT7
- E. CAT5e
Answer: B,D
NEW QUESTION 88
Which Cisco UCS Virtual Interface Card Series is designed exclusively for the M5 generation?
- A. VIC 1200 Series
- B. VIC 1300 Series
- C. M81KR VIC
- D. VIC 1400 Series
Answer: D
NEW QUESTION 89
What is the command to provide details pertaining to the state of the cluster?
- A. Show extended cluster state
- B. Show cluster extended-state
- C. Show cluster
- D. Show cluster state
Answer: B
NEW QUESTION 90
......
Ultimate Guide to the 010-151 - Latest Edition Available Now: https://www.actualcollection.com/010-151-exam-questions.html
2021 Updated Verified Pass 010-151 Study Guides & Best Courses: https://drive.google.com/open?id=1muLKNl-CYQ6lKC4CYXVF9sDu6F4seQvT