[Sep 03, 2021] JN0-663 Dumps Full Questions - Exam Study Guide
JNCIP-SP Free Certification Exam Material from ActualCollection with 95 Questions
NEW QUESTION 50
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. This router is an ASBR.
- B. This router is an ABR
- C. There are two interfaces marked as passive.
- D. There is one interface marked as passive.
Answer: A,C
NEW QUESTION 51
Exhibit.
Your router should be configured with a rewrite rule which alters the default behavior of expedited forwarding as shown in the exhibit In this scenario which configuration is correct?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION 52
What are two reasons an IBGP learned route would be hidden? (Choose two.)
- A. The route has a next hop of the local routing device.
- B. The route is rejected by an export policy.
- C. The route is suppressed by damping.
- D. The route has an empty AS path.
Answer: A,C
NEW QUESTION 53
Exhibit:
Referring to the exhibit, which three statements are correct? (Choose three.)
- A. This ESI Auto-Discovery route is used for designated forwarder election.
- B. The router with the IP address 10.101.100.3 is the originator of this route.
- C. This route contains the MAC address of an end host.
- D. This route is an EVPN Type-1 route.
- E. The ESI is 00:22:22:22:22:22:22:22:22:22.
Answer: B,D,E
NEW QUESTION 54 
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
- A. Configure the family inet-vpn unicaststatement on the BGP neighbor.
- B. Configure the family inet unicaststatement on the local BGP router.
- C. Configure the family inet unicaststatement on the BGP neighbor.
- D. Configure the family inet-vpn unicaststatement on the local BGP router.
Answer: A,D
NEW QUESTION 55 
Referring to the exhibit, what will the IS-IS cost be for R3 to reach R1?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 56
Exhibit:
Referring to the exhibit, which two statements are true? (Choose two.)
- A. An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.
- B. An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.
- C. The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.
- D. The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.
Answer: B,C
NEW QUESTION 57
Exhibit:
R4 is directly connected to both RPs (R2 and R3). R4 is currently sending all joins upstream to R3 but you want to load balance the joins between both RPs Referring to the exhibit, which configuration change will solve this issue?
- A. Configure the join-load-balance parameter under PIM on R4.
- B. Configure the bootstrap priority on R2 to be the same as R3.
- C. Configure the default route in inet.2 on R4 from R3 as the next hop to both R3 and R2.
- D. Configure the group-range parameter to be the same on R2 and RCA
Answer: A
NEW QUESTION 58 
You manage an MX Series device which includes the configuration shown in the exhibit. Traffic marked with DSCP 000011 is entering the ge-1/0/4 interface at 102 Mbps. The traffic exits the device on the ge-1/0/5 interface. No other traffic is transiting the router.
In this scenario, what happens to traffic exceeding 100 Mbps?
- A. Traffic exceeding 100 Mbps is redirected to a rate limiter.
- B. Traffic exceeding 100 Mbps is buffered.
- C. Traffic exceeding 100 Mbps is forwarded.
- D. Traffic exceeding 100 Mbps is dropped.
Answer: D
NEW QUESTION 59
Exhibit:
Referring to the exhibit, you are asked to summarize all routes in the 10.10.0 0/22 address range ensuring that a single summary route is present in area 49.0002 while the IS-IS internal contributing routes are restricted to area 49.0001. All other routes must not be affected.
Which two operations would have to be performed on R2 to accomplish this task? (Choose two.)
- A. Create and apply a policy with a single term to accept only the summary route.
- B. Include the from level 1 match criteria when referencing the summary route.
- C. Create and apply a policy with two terms; one to accept the summary route and one to reject the contributing routes.
- D. Include the to level 2 match criteria when referencing the summary route.
Answer: C,D
NEW QUESTION 60
Exhibit:
Referring to the exhibit, external routes are being received at R1. These routes must appear on R5.
Which action will produce this result?
- A. Write an export policy on R4 from level 2 to level 1 matching the external routes.
- B. Turn on wide metrics on R4 and R5 and write an export policy on R2 from level 1 to level 2 matching the external routes.
- C. Turn on wide metrics on R1 and R2 and write an export policy on R4 from level 2 to level 1 matching the external routes.
- D. Write an export policy on R2 from level 1 to level 2 matching the external routes.
Answer: C
NEW QUESTION 61
Exhibit:
Referring to the exhibit, what will the IS-IS cost be for R1 to reach R3?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 62
Exhibit:
Which three statements are true about the show pim join output shown in the exhibit? (Choose three.)
- A. The shortest path to the source is through the RP
- B. This is a source-specific multicast stream. G The multicast receiver is still using the RP to receive the stream.
- C. The multicast stream has been configured with a backup path to allow for fast reroute.
- D. The multicast stream does not have an RP.
Answer: A,C,D
NEW QUESTION 63
Click the Exhibit button.
A network administrator is investigating why traffic from R2 is not being forwarded to R1 Referring to the show isis database command output shown in the exhibit, what is causing this problem on the network?
- A. R2 is ignoring specific LSPs from R1 in its SPF calculations.
- B. R1 and R2 are in different IS-IS areas.
- C. The preferred interface between R1 and R2 is experiencing errors
- D. R1 is configured to drop all incoming traffic.
Answer: A
NEW QUESTION 64 
Refer
ring to the exhibit, which two statements are correct for a route advertised by R1 towards R4? (Choose two.)
- A. The BGP next hop is set to 192.168.2.2 by R2.
- B. The AS path is set to 150 by R2.
- C. The AS path is set to null by R2.
- D. The BGP next hop is set to 14.1.1.1 by R2.
Answer: C,D
NEW QUESTION 65
Exhibit:
Referring to the exhibit, you want to reduce the CPU processing load on PE 2 by preventing the receipt of routes belonging to Customer B.
In this scenario, which Layer 3 VPN scaling mechanism provides this functionality?
- A. route refresh
- B. route target filtering
- C. route origin
- D. route reflection
Answer: B
NEW QUESTION 66
Exhibit:
Your network is connected to two different ISPs and you notice that they are using your network for transit traffic.
In this scenario, which two configuration statements will solve this problem? (Choose two.)
- A. set policy-options policy-statement ISP term REST then reject
- B. set policy-options as-path LOCAL-ROUTES " (65310 I 65441) +"
- C. set policy-options policy-statement ISP term ROUTES then reject
- D. set policy-options as-path LOCAL-ROUTES "()"
Answer: A,D
NEW QUESTION 67
Exhibit:
Referring to the exhibit, the local BGP router is receiving IPv4 routes from the BGP neighbor, but it is not receiving L3 VPN routes from the BGP neighbor.
Which two actions should you take to solve this problem? (Choose two.)
- A. Configure the family inet unicast statement on the BGP neighbor
- B. Configure the family inet-vpn unicast statement on the local BGP router.
- C. Configure the family inet-vpn unicast statement on the BGP neighbor.
- D. Configure the family inet unicast statement on the local BGP router.
Answer: B,C
NEW QUESTION 68
Exhibit:
CE-1, CE-2, and CE-3 are part of a single VPLS VPN An Ethernet frame has just arrived at PE-3 from CE-3.
It has a source MAC address of CE-3 and a destination MAC address of CE-1. You want to know what PE-3 does with the Ethernet frame.
Referring to the exhibit, which statement is correct?
- A. It forwards the packet to PE-1 only.
- B. It forwards the packet to PE-1 and PE-2.
- C. It drops the packet because the destination MAC address is not for PE-3.
- D. It drops the packet because the destination MAC address is not in PE-3's MAC table.
Answer: B
NEW QUESTION 69
You are deploying a new EVPN service for your customers. You must build the service based on the following requirements
-- both Layer 2 and Layer 3 functionality must be supported
-- your customers must be able to support multiple VLANs in the same EVPN instance (EVI).
In this scenario which two types of routing instances should be configured? (Choose two.)
- A. virtual router
- B. VRF
- C. EVPN
- D. virtual switch
Answer: B,C
NEW QUESTION 70
Exhibit:
Traffic is being sent from R2 to R3. The link between R2 and R3 fails.
Referring to the exhibit, which statement is correct?
- A. Manual intervention is required for traffic to be rerouted.
- B. Traffic will automatically reroute distributed between all available paths.
- C. Traffic will automatically reroute using R2 to R4 to R1 to R3.
- D. Traffic will automatically reroute using the shortest path, which is R2 to R1 to R3.
Answer: C
NEW QUESTION 71
You are considering different MPLS VPN connectivity options of a new customer deployment Your customer requires shared LSPs Layer 2 connectivity and auto-provisioning Which type of VPN satisfies the requirements?
- A. circuit cross-connects
- B. BGP Layer 3 VPNs
- C. LDP Layer 2 circuits
- D. BGP Layer 2 VPNs
Answer: D
NEW QUESTION 72
Exhibit:
You have a Layer 3 VPN established between PE-1 and PE-2 as well as between PE-1 and PE-3. You are using a route reflector (RR-1) to distribute VPN routes to your IBGP peers. You are asked to ensure that only relevant routes are sent from RR-1 to each of the PE routers.
Referring to the exhibit, which statement is correct?
- A. You should use firewall filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
- B. You should use route target filtering on RR-1 and all the PE devices to control which routes are sent to each PE router.
- C. You should use VRF export policies on RR-1 to control which routes are sent to each PE router.
- D. You should use route target filtering only on RR-1 to control which routes are sent to each PE router.
Answer: D
NEW QUESTION 73
Exhibit:
Referring to the exhibit, you have recently established a Layer 3 VPN between PE-1 and PE-2, connecting the two CE sites. Rowing information is being shared between sites and the customer has two-way communication After adding this VPN to your core network, PE-1 and PE-2 are no longer able to forward traffic to the Internet.
In this scenario, what is the problem?
- A. You must configure the inet-vpn NLRI for the BGP sessions on both your PE devices.
- B. You must configure a separate internal BGP group on both your PE devices specifically for Internet connectivity.
- C. You must configure the inet unicast NLRI for the BGP session on both your PE devices.
- D. You must configure a multihop external BGP session between your PE devices and the Internet provider's ISP-A device.
Answer: C
NEW QUESTION 74
......
Dumps Brief Outline Of The JN0-663 Exam: https://www.actualcollection.com/JN0-663-exam-questions.html