Share Latest Feb-2025 NSE6_FSR-7.3Test Practice Test Questions, Exam Dumps
Positive Aspects of Valid Dumps NSE6_FSR-7.3 Exam Dumps!
Fortinet NSE6_FSR-7.3 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION # 21
What are two different services that you can configure for monitoring system and cluster health statuses on FortiSOAR?
(Choose two.)
- A. Exchange
- B. POP
- C. SMTP
- D. IMAP
Answer: A,C
NEW QUESTION # 22
An administrator is issuing the following command on a node trying to join a FortiSOAR duster as a standby: csadm ha join-cluster --status active -role secondary --primary-node 10.0.1.160 The node fails to join the cluster. What is the issue?
- A. The primary node needs to be resolvable via FQDN.
- B. The IP address should be for secondary-node Instead of primary-node.
- C. The role value should be worker.
- D. The status value should be passive.
Answer: D
Explanation:
When joining a FortiSOAR cluster as a standby node, the correct status value should be passive. Using active would imply that the node is trying to join as an active node, which could cause conflicts in the cluster setup. In FortiSOAR, standby nodes must be set as passive to ensure they are recognized correctly and to avoid conflicts with the primary node or other active nodes within the cluster. Therefore, setting the status to passive will resolve the issue and allow the node to join the cluster as intended.
NEW QUESTION # 23
When deleting a user account on FortiSOAR, you must enter the user ID in which file on FortiSOAR?
- A. userDelete.txt.
- B. usersToDelete.txt
- C. config_yml
- D. scripts
Answer: B
Explanation:
When deleting a user account in FortiSOAR, the user ID must be entered into the usersToDelete.txt file. This file is specifically used to list users that are marked for deletion. Once the user IDs are listed in this file, the system can process the deletion of these accounts as part of its user management operations. This method ensures that only specified users are deleted, as referenced in FortiSOAR's administrative controls.
NEW QUESTION # 24
Refer to the exhibit.
How long after the syops-ha service goes down will the heartbeat missed notification be sent to the administrator?
- A. 15 minutes
- B. 5 minutes
- C. 60 minutes
- D. 3 minutes
Answer: C
Explanation:
In FortiSOAR's high availability (HA) setup, if the cyops-ha service becomes unresponsive, the system is configured to send a "heartbeat missed" notification after a specified period, which in this case is 60 minutes. This delay allows for transient issues to be resolved without triggering immediate alerts, while also ensuring that administrators are informed of prolonged service disruptions. Timely notifications about the cyops-ha service's status help maintain the reliability and responsiveness of the HA environment.
NEW QUESTION # 25
Refer to the exhibit.
Which two statements about the recommendation engine are true? (Choose two.)
- A. The recommendation engine is set to automatically accept suggestions.
- B. The alert severity is High, but the recommendation is for it to be set to Medium
- C. The dataset is trained to predict the Severity and Type fields.
- D. There are no playbooks that can be run on the recommended alerts using the recommendation panel
Answer: B,C
Explanation:
The Recommendation Engine in FortiSOAR is designed to assist in alert triage by suggesting values for certain fields based on historical data and machine learning models. In this case, the engine is trained to predict both the Severity and Type fields, suggesting values that align with past incidents and threat intelligence. Although the current alert severity is High, the recommendation engine has suggested adjusting it to Medium based on the pattern of similar past alerts, indicating a less critical threat level than initially perceived. This functionality helps analysts by providing data-driven insights, which can optimize alert handling and resource allocation.
NEW QUESTION # 26
Refer to the exhibit.
The former primary node was relegated to the secondary rote but is stuck in the Faulted state.
Which two steps must you take to restore operation in the high availability (HA) cluster? (Choose two.)
- A. Restart the node that is in the Faulted state to trigger another election.
- B. Enter the csadm ha join-cluster command to have the node that is in the Faulted state rejoin the HA cluster as a secondary node.
- C. On the node that is in the Faulted state, enter the csadm ha leave-cluster command.
- D. Perform a fire drill to test the database integrity of the node that is in the Faulted state.
Answer: B,C
Explanation:
In a FortiSOAR HA cluster, if the former primary node is relegated to a secondary role but is stuck in a Faulted state, it indicates that the node has lost sync or faced a failure during a role change. To restore its functionality, first, you should remove it from the cluster using the csadm ha leave-cluster command. Once it has left the cluster, you can use the csadm ha join-cluster command to re-add the node as a secondary node. This process will allow it to sync back up with the cluster and resume its role as intended.
NEW QUESTION # 27
Which two statements about FortiSOAR virtual instance deployment requirements are true? (Choose two.)
- A. FortiSOAR is supported on VMWare ESXi and Amazon Web Services (AWS).
- B. FortiSOAR Cloud is a subscription service that allows you to deploy an instance hosted on FortlCloud.
- C. While memory and storage can be added based on requirements, charges are required for every vCPU that is added to the FortiSOAR VM.
- D. There are size limits for the records database, but no charges or fees for storing months or years worth of data.
Answer: A,B
Explanation:
FortiSOAR offers flexibility in deployment environments, including FortiSOAR Cloud, which is a subscription service that enables hosting on FortiCloud. This provides cloud-hosted management with scalable resources. Additionally, FortiSOAR supports deployment on VMware ESXi and Amazon Web Services (AWS), allowing organizations to choose based on their infrastructure preferences. This flexibility ensures that FortiSOAR can be integrated into various IT environments depending on business needs.
NEW QUESTION # 28
What are two use cases for configuring a FortiSOAR HA cluster?
(Choose two.)
- A. Disaster recovery
- B. Multi-tenancy
- C. Data externalization
- D. Scaling
Answer: A,D
NEW QUESTION # 29
Which two ports must be open between FortiSOAR HA nodes'* (Choose two.)
- A. Port 9200
- B. Port 6380
- C. Port 25
- D. Port 5432
Answer: A,D
Explanation:
In a FortiSOAR HA configuration, certain ports must be open for communication between nodes. Port 5432 is required for PostgreSQL database communication, which is essential for data replication between HA nodes. Port 9200 is used by Elasticsearch, which FortiSOAR leverages for indexing and search functions across the nodes. These ports must be accessible between nodes to ensure seamless operation and data consistency within the cluster.
NEW QUESTION # 30
Refer to the exhibit.
When importing modules to FortiSOAR using the configuration wizard, what actions are applied to fields it you select Merge with Existing as the Bulk action?
- A. Existing Holds are overwritten, now fields are added, and non-imported fields are deleted.
- B. Existing fields are kept, new fields are added, and non-imported fields are kept.
- C. Existing fields are kept, new fields are added, and non-imported fields are deleted.
- D. Existing fields are overwritten, new fields are added, and non-Imported fields are kept.
Answer: D
Explanation:
When importing modules into FortiSOAR using the configuration wizard and selecting "Merge with Existing" as the bulk action, the behavior for field handling is as follows: any fields that already exist in the system are overwritten with the imported values. New fields from the imported module are added to the system, while fields that are not part of the imported module remain unaffected and are retained in the system. This option ensures that existing data structures are updated with new information without losing existing, but non-imported, fields.
NEW QUESTION # 31
Which two relationship types are configurable on FortiSOAR?
(Choose two.)
- A. Grandparents
- B. Siblings
- C. Relatives
- D. Parents
Answer: B,D
NEW QUESTION # 32
For which two modules on FortiSOAR can you create SLA templates7 (Choose two.)
- A. Incidents
- B. Tasks
- C. Alerts
- D. Indicators
Answer: C,D
Explanation:
In FortiSOAR, SLA (Service Level Agreement) templates can be created for specific modules, including Alerts and Indicators. These templates are essential for tracking response and resolution times, ensuring compliance with defined service levels. By configuring SLAs on the Alerts and Indicators modules, organizations can monitor the time taken to address these items, which is critical in maintaining efficient incident response and management practices. The SLA templates can be customized according to specific business requirements and are applied to records within these modules to enforce timely actions.
NEW QUESTION # 33
Which two statements about upgrading a FortiSOAR HA cluster are true7 (Choose two.)
- A. Nodes can be upgraded while the primary node or secondary node are in the HA cluster.
- B. The upgrade procedure for an active-active cluster and an active-passive cluster are the same.
- C. Upgrading a FortiSOAR HA cluster requires no downtime.
- D. It is recommended that the passive secondary node be upgraded first, and then the active primary node.
Answer: B,D
Explanation:
Upgrading a FortiSOAR HA cluster follows the same procedure regardless of whether it is configured in an active-active or active-passive setup. The process generally involves upgrading one node at a time to minimize service disruption. Best practices recommend upgrading the passive secondary node first before moving to the active primary node. This sequence helps maintain cluster stability and ensures that at least one node remains operational during the upgrade.
NEW QUESTION # 34
Select two statements that are true about FortiSOAR themes.
(Choose two.)
- A. There are three theme options available: Dark, Light, and Sky.
- B. Selecting Revert Theme allows the user to revert the user profile theme.
- C. Non-administrator users can change the theme by editing their user profile.
- D. FortiSOAR theme can be configured to apply to all users on the system.
Answer: C,D
NEW QUESTION # 35
Which two statements about Elasticsearch are true? (Choose two.)
- A. To change the location of your Elasticsearch instance from the local instance to a remote location, you must update the falcon. conf file.
- B. The global search mechanism in FortiSOAR leverages an Elasticsearch database to achieve rapid, efficient searches across the entire record system.
- C. Elasticsearch allows you to store, search, and analyze huge volumes of data quickly. In near real time, and return answers in milliseconds.
- D. The minimum version of the Elasticsearch cluster must be 6.0.2. if you want to externalize the Elasticsearch data.
Answer: B,C
Explanation:
Elasticsearch in FortiSOAR is used for its robust data handling capabilities, allowing rapid storage, searching, and analysis of vast amounts of data in near real-time. Its integration with FortiSOAR's global search enables efficient querying across all records, providing quick response times and a seamless user experience. The Elasticsearch database is crucial for handling extensive datasets and delivering swift search results, making it integral to FortiSOAR's performance and data management capabilities.
NEW QUESTION # 36
An administrator wants to collect and review all FortiSOAR log tiles to troubleshoot an issue. Which two methods can they use to accomplish this? (Choose two.)
- A. Download the logs from the GUI.
- B. Enter the caacta log -collect directory command.
- C. Enter the csacta services -status command, and then copy the output.
- D. Review the contents of /var/log/messages.
Answer: A,B
Explanation:
Administrators can collect and review FortiSOAR logs for troubleshooting in two primary ways. First, they can download logs directly from the GUI, which provides access to various logs through an intuitive interface. Secondly, using the command-line interface, the csacta log --collect command can be used to gather all logs within a specified directory, enabling more detailed offline analysis. Both methods offer comprehensive log collection to aid in diagnosing and resolving issues.
NEW QUESTION # 37
......
Practice LATEST NSE6_FSR-7.3 Exam Updated 41 Questions: https://www.actualcollection.com/NSE6_FSR-7.3-exam-questions.html
First Attempt Guaranteed Success in NSE6_FSR-7.3 Exam: https://drive.google.com/open?id=1F013Ggg9vpuEueEzlUp82wHb6kQfVYAi