Updated PDF (New 2021) Actual HP HPE6-A66 Exam Questions
Verified HPE6-A66 Exam Dumps PDF [2021] Access using ActualCollection
Understanding functional and technical aspects of Plan and design an Aruba solution percustomer requirements
The following will be asked from you in the HP HPE6-A66 dumps:
- Given the customer requirementsfor a single-site campus environment design the high-level Aruba solution
- Given a scenario, select the appropriate products based on the customer’stechnical requirements for a simple campus environment
- Given a customer scenario, explain how a specifictechnology or solution would meet the customer’srequirements
NEW QUESTION 21
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 40 MHZ
- B. 10MHZ
- C. 60 MHZ
- D. 20 MHz
Answer: C
NEW QUESTION 22
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?
- A. Stationary devices
- B. Nomadic devices
- C. Highly mobile devices (HMD)
- D. Somewhat mobile devices (SMD)
Answer: B
NEW QUESTION 23
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11V
- B. 802.11r
- C. 802.11 ax
- D. S02.11h
Answer: C
NEW QUESTION 24
NewStellar has a main corporate campus in a business park with two adjacent buildings that are 150 feet apart (46 meters). This is an open campus with no obstructions between the two buildings Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total, which results in a total of 338,100 feet (31,410 square meters) for the entire building space. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters) The network architect has given one floor to analyze. Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply, and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters).
The company has determined that Wi-Fi coverage will not include the central area of each floor, which includes the washrooms, stairs, elevators and supply and network cabinets. Based on a capacity design, approximately how many APs should a network architect add to each floor to plan the design in VisuaiRF?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 25
Which component uniquely defines the BSSID when implementing an employee SSID?
- A. Radio MAC address
- B. Wireless device MAC address
- C. Case-insensitive SSID name
- D. Case-sensitive SSID name
Answer: B
NEW QUESTION 26
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Place the APs above the ceiling and behind the walls
- B. Paint the APs to match the ceilings or walls
- C. Place a strip of tape over the LEDs
- D. Order Aruba AP covers for the APs
Answer: A
NEW QUESTION 27
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. 2 CiearPass
- B. NetEdit
- C. Network Analysis Engine
- D. Mobility First
Answer: B
NEW QUESTION 28
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. FRAPs in a cluster
- B. Two 7205 mobility controller and campus APs in a cluster
- C. Two 7030 mobility controller and campus APs in a cluster
- D. lAPs in a cluster
Answer: A
NEW QUESTION 29
A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP's smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?
- A. 10 Gbps
- B. 5 Gbps
- C. 2.5 Gbps
- D. 1 Gbps
Answer: C
NEW QUESTION 30
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?
- A. Two 2930M 24-port POE+ switches
- B. One 2930M 48-port POE+ switch
- C. One 3810M 40G 8 HPE Smart Rate switch
- D. Two 2930F 24-port POE+ switches
Answer: B
NEW QUESTION 31
Which AP mode allows an AP to operate autonomously?
- A. RAP
- B. AM
- C. OCAP
- D. IAP
Answer: C
NEW QUESTION 32
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?
- A. AP 375 with external omnidirectional antennas
- B. AP 365 with integrated omnidirectional antennas
- C. AP 510 with external omnidirectional antennas and plastic AP cover
- D. AP 318 with external omnidirectional antennas
Answer: D
NEW QUESTION 33
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. types of users and their devices
- B. square footage
- C. ceiling height
- D. number of buildings
- E. number of users
Answer: B,C
NEW QUESTION 34
A customer is purchasing Aruba 555 APs for a new wireless network. The APs will be pre-staged as campus APs (CAPs) and be managed by a controller solution During the pre-staging process, console access to the APs might be necessary Which console connection cable should the customer purchase for the 555 APs?
- A. Micro-B USB
- B. RS-232
- C. RJ-45
- D. USB-A
Answer: A
NEW QUESTION 35
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 36
......
Try Best HPE6-A66 Exam Questions from Training Expert ActualCollection: https://www.actualcollection.com/HPE6-A66-exam-questions.html