Updated VMCE_V10 Dumps PDF - VMCE_V10 Real Valid Brain Dumps With 50 Questions!
100% Free VMCE_V10 Exam Dumps Use Real VMCE Dumps
NEW QUESTION 28
A company has the following requirements:
Mission-critical VMs: hourly replication to disaster recovery site, daily backups of these VMs should be available at the disaster recovery site when required, the mission critical applications need to be available within 20 minutes.
Business-important VMs: daily backups should be stored at the disaster recovery site.
When required, the business-important applications need to be available within four hours.
Define the RPO and RTO for the company's disaster recovery site.
- A. Mission-critical VMs: RPO = 24 hours, RTO = four hours; business-important VMs: RPO
= 24 hours, RTO
= four hours - B. Mission-critical VMs: RPO = 60 minutes, RTO = one hour; business-important VMs:
RPO = 60 minutes, RTO = four hours - C. Mission-critical VMs: RPO = 24 hours, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO
= four hours - D. Mission-critical VMs: RPO = 60 minutes, RTO = 20 minutes; business-important VMs:
RPO = 24 hours, RTO = four hours
Answer: B
NEW QUESTION 29
Your company is using Veeam ONE to monitor VM performance in real time. An end user has called to complain about the performance of a VM and has asked you to investigate the cause of the issue. Where in Veeam ONE do you go to view real time VM metrics?
- A. In the monitor client under the data protection view
- B. In the monitor client under the infrastructure view
- C. In the reporter portal in the dashboards tab, VM performance dashboard
- D. In the reporter portal in the workspace tab, VM performance
Answer: A
Explanation:
Reference: https://www.veeam.com/blog/monitoring-vmware-hyperv-environment.html
NEW QUESTION 30
What transport mode does the Linux backup proxy support?
- A. Network
- B. Automatic
- C. Direct storage access
- D. Virtual appliance
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/backup_proxy.html?ver=100
NEW QUESTION 31
Figure A shows the backup files on a Scale-out Backup Repository (SOBR) created by a single Veeam backup job. The SOBR is configured to offload to capacity tier in move mode. If the offload was completed successfully, what will remain on the performance extents for the files uploaded to the capacity tier?
- A. VBM files (metadata only)
- B. VIB and VBK files (data blocks only)
- C. VIB and VBK files (metadata only)
- D. VBK files (metadata and data)
- E. VIB files (metadata and data)
Answer: C
NEW QUESTION 32
You fail back a VM replica to the original location. Which of the following requirements needs to be met to be able perform quick rollback during a failback of a replica?
- A. Indexing must be enabled for the original VM
- B. Perform failback to VM within the same subnet
- C. The VM replica must be created with the "Use Changed Block Tracking data" option enabled
- D. The VM replica must have access to the repository where the full backup of the VM resides
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/failback_quick_rollback.html?ver=100
NEW QUESTION 33
Which of the following is a backup mode that can be configured within a Veeam Agent for Windows backup job?
- A. Reverse incremental with optional periodic synthetic full backups
- B. Forward incremental and reverse incremental, both with optional periodic synthetic and/or active full backups
- C. Reverse incremental with periodic active full backups
- D. Forward incremental with optional periodic synthetic and/or active full backups
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/forward_incremental_backup.html?ver=
100
NEW QUESTION 34
If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?
- A. Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM
- B. Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler
- C. In the virtual machines setting of the job, add a script in the scripts tab under "Run the following script before the job:"
- D. In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM
Answer: A
NEW QUESTION 35
When deploying an advanced single-host virtual lab in a VMware environment, what will Veeam create?
- A. A distributed virtual switch without uplink(s)
- B. A distributed virtual switch with uplink(s)
- C. A standard virtual switch with uplink(s)
- D. A standard virtual switch without uplink(s)
Answer: C
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/surebackup_advanced_vlab.html?ver=
100
NEW QUESTION 36
Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?
- A. Replication
- B. Backup copy
- C. Backup to tape
- D. File to tape
Answer: A
Explanation:
Reference: https://helpcenter.veeam.com/docs/backup/vsphere/replication.html?ver=100
NEW QUESTION 37
Veeam is used for replicating VMware VMs. The production environment is comprised of two networks: 192.168.1.0/24 and 172.16.0.0/16. A web application requires a database server (whose IP address is 172.21.0.12) to receive queries from a web client (whose IP address is 192.168.1.32). The replicas are spread over multiple hosts. A backup administrator needs to configure a virtual lab to test a web client to database server query.
Which of the following virtual lab types must be configured?
- A. Basic single-host
- B. Advanced single-host
- C. All virtual lab configurations would support that
- D. Advanced multi-host
Answer: B
NEW QUESTION 38
A company wants to leverage Veeam DataLabs to automate the creation of a test environment. As testing one large, multi-VM application could require more than a single host, a dedicated VMware ESXi cluster has been identified. The sandbox is to be refreshed weekly or on demand. Select the benefits of using replication jobs in this environment.
(Choose two.)
- A. Replicas can take advantage of advanced multi-host virtual labs
- B. There is a bigger number of VMs supported for multi-VM application tests when replicas are used
- C. There are additional tests available in DataLabs when replicas are the source
- D. Replication jobs do not stop the sandbox, unlike backup jobs
- E. The VMs are running directly on a high performance datastore, uncompressed
Answer: A,E
NEW QUESTION 39
An SMB customer installed Veeam Backup & Replication in a simple deployment. How can the customer comply with the 3-2-1 rule?
- A. Create a Scale-out Backup Repository with object storage in the public cloud used as the capacity tier leveraging move mode
- B. Create a backup to tape job to a local virtual tape library
- C. Copy the backups to a separate local NAS device
- D. Create a Scale-out Backup Repository with object storage in the public cloud used as the capacity tier leveraging copy mode
Answer: C
NEW QUESTION 40
When a replication job is configured to use the replica mapping feature (no seeding), what will happen during the first run of the job?
- A. The replication job calculates the differences between the original and mapped VM; only the incremental changes will be synchronized
- B. The replication job will first restore the VM from the most recent restore point and then start to synchronize the incremental changes from the source infrastructure
- C. The replication job creates a clone of the mapped replica to preserve the original state before synchronizing the changes from the source infrastructure
- D. If a VM within the replication job is not mapped, the job will fail
Answer: A
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/hyperv/replica_seeding_hv.html?ver=100
NEW QUESTION 41
What are the three Veeam Backup & Replication technologies required to verify recoverability of the backup? (Choose three.)
- A. Virtual lab
- B. Backup proxy
- C. Replication job
- D. Application group
- E. SureBackup job
- F. Gateway Server
Answer: A,C,E
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/recovery_verification_overview.html?v er=100
NEW QUESTION 42
Veeam ONE has been installed in the typical data collection mode and historical data is the installation default. A customer is looking at performance charts in Veeam ONE Monitor.
When troubleshooting a performance event from two days ago, what will they see?
- A. Aggregated data every five minutes
- B. Data does not exist
- C. Aggregated data every two hours
- D. Raw data every 20 seconds
Answer: C
NEW QUESTION 43
A backup administrator needs to restore two data drives to a VM where the operating system remains intact. The target machine must remain powered on. What recovery option is most appropriate to perform this operation?
- A. Instant VM Recovery
- B. Restore VM files
- C. Restore entire VM
- D. Instant disk recovery
Answer: A
Explanation:
Explanation: Section: (none)
Explanation
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/instant_recovery.html?ver=100
NEW QUESTION 44
Which backup method produces a backup chain that consists of the first full backup file (VBK) and a set of incremental backup files (VIB) following it? Additionally, the backup chain contains synthetic full and/or active full backup files that divide the backup chain into shorter series.
- A. Forever forward incremental backup
- B. Reverse incremental backup
- C. Differential incremental backup
- D. Forward incremental backup
Answer: D
Explanation:
Reference:
https://helpcenter.veeam.com/docs/backup/vsphere/forward_incremental_backup.html?ver
=100
NEW QUESTION 45
The backup administrator configured replication for a VM from Data Center 1 to Data Center 2, which runs every day at 1 a.m. A power surge takes out Data Center 1 at 7 a.m.
and the administrator fails over the
replica at 8 a.m. When the power comes back on, the administrator performs the "failback" action at 2 p.m. and checks the state of the original VM. They recognize that not all data is available. What is missing?
- A. Data from 7 a.m. to 8 a.m.
- B. Data from 1 a.m. to 2 p.m.
- C. Data from 8 a.m. to 2 p.m.
- D. Data from 1 a.m. to 7 a.m.
Answer: B
NEW QUESTION 46
Which of the following scenarios properly applies the 3-2-1 rule to backup jobs?
- A. Use backup jobs to back up directly to tape; ship the tapes off site
- B. Use a backup job to back up to a local repository; perform a backup copy job to a repository in another location
- C. Use a backup job to back up to a Scale-out Backup Repository configured with capacity tier using AWS S3 and enable move mode
- D. Use a backup job to back up to a local repository; perform a backup copy job to the same repository
Answer: D
NEW QUESTION 47
A NAS backup job has been configured within Veeam Backup & Replication, and is completing successfully, but restore operations have been failing for the last few days.
What is causing the failure?
- A. The cache repository assigned for this file share is unavailable for restore operations
- B. The credentials added to the share are not allowed read-write access to the share, directories or files
- C. The server was added by using an IQN alias which is unable to be resolved
- D. The backup repository is sealed
Answer: B
NEW QUESTION 48
......
Pass Your VMCE_V10 Exam Easily With 100% Exam Passing Guarantee: https://www.actualcollection.com/VMCE_V10-exam-questions.html