Get Started: NSE7_SDW-6.4 Exam [2023] Dumps Fortinet PDF Questions
NSE7_SDW-6.4 Premium Exam Engine pdf Download
Fortinet NSE7_SDW-6.4 Certification Exam is designed for network and security professionals who have experience with Fortinet SD-WAN solutions and are looking to enhance their skills and knowledge in this area. Fortinet NSE 7 - SD-WAN 6.4 certification is ideal for network engineers, security engineers, system administrators, and IT professionals who are responsible for managing SD-WAN solutions in their organizations.
Fortinet NSE7_SDW-6.4 certification exam is an excellent opportunity for professionals who want to advance their careers in the field of SD-WAN. Fortinet NSE 7 - SD-WAN 6.4 certification ensures that candidates have the necessary knowledge and skills to work with Fortinet's SD-WAN technology, which is highly regarded in the industry. Fortinet NSE 7 - SD-WAN 6.4 certification also validates candidates' abilities to design and implement secure and efficient SD-WAN solutions, enhancing their professional credibility and improving their job prospects.
NEW QUESTION # 44
Refer to the exhibit. Which conclusion about the packet debug flow output is correct?
- A. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- B. The number of concurrent sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the firewall policy, and the packet was dropped.
- C. The total number of daily sessions for 10.1.10.1 exceeded the maximum number of concurrent sessions configured in the traffic shaper, and the packet was dropped.
- D. The packet size exceeded the outgoing interface MTU.
Answer: A
NEW QUESTION # 45
Refer to the exhibits.
ExhibitA shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate.
Based on the FortiGate configuration shown in the exhibits, what issue might you encounter when creating an SD-WAN zone for port1 and port2?
- A. port1 is referenced in a firewall policy.
- B. port1 and port2 are not administratively down.
- C. port2 is referenced in a static route.
- D. port1 is assigned a manual IP address.
Answer: A
NEW QUESTION # 46
What is the lnkmtd process responsible for?
- A. Monitoring links for any bandwidth saturation
- B. Logging interface quality information
- C. Processing performance SLA probes
- D. Flushing route tags addresses
Answer: C
Explanation:
SD-WAN 6.4.5 Guide Page 105.
NEW QUESTION # 47
Which statement defines how a per-IP traffic shaper of 10 Mbps is applied to the entire network?
- A. The 10 Mbps bandwidth is shared equally among the IP addresses.
- B. Each IP is guaranteed a minimum 10 Mbps of bandwidth
- C. FortiGate allocates each IP address a maximum 10 Mbps of bandwidth.
- D. A single user uses the allocated bandwidth divided by total number of users.
Answer: C
NEW QUESTION # 48
Refer to the exhibit.
Which statement about the trace evaluation by FomGate is true?
- A. The packet exceeded the configured maximum bandwidth and was dropped by the shared shaper.
- B. The packet exceeded the configured bandwidth and was dropped based on the priority configuration.
- C. Packets exceeding the configured maximum concurrent connection limit are denied by the per-IP shaper.
- D. Packets exceeding the configured concurrent connection limit are dropped based on the priority configuration.
Answer: C
NEW QUESTION # 49
Refer to the exhibit.
Based on the exhibit, which statement about FortiGate re-evaluating traffic is true?
- A. Changes have been made on firewall policy ID 1 on FortiGate.
- B. FortiGate has terminated the session after a change on policy ID 1.
- C. Firewall policy ID 1 has source NAT disabled.
- D. The type of traffic defined and allowed on firewall policy ID 1 is UDP.
Answer: A
NEW QUESTION # 50
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?
- A. get router info routing-table
- B. diagnose sys virtual-wan-link service
- C. diagnose debug application ike
- D. get ipsec tunnel list
Answer: C
NEW QUESTION # 51
Which diagnostic command can you use to show the SD-WAN rules interface information and state?
- A. diagnose sys sdwan service.
- B. diagnose sys sdwan member.
- C. diagnose sys sdwan neighbor.
- D. diagnose sys sdwan route-tag-list.
Answer: A
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Diagnostic-commands-to-check-the-status-of-the-SD/ta-p/194246
NEW QUESTION # 52
What would best describe the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?
- A. Shared policy shaping mode
- B. Reverse policy shaping mode
- C. Interface-based shaping mode
- D. Per-IP shaping mode
Answer: A
NEW QUESTION # 53
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set cost 15.
- C. Set load-balance-mode source-ip-ip-based.
- D. Set source 100.64.1.1.
Answer: D
NEW QUESTION # 54
Refer to the exhibit.
Based on the exhibit, which two actions does FortiGate perform on traffic passing through the SD-WAN member port2? (Choose two.)
- A. FortiGate performs routing lookups for new sessions only after a route change.
- B. FortiGate marks the routing information on existing sessions as persistent.
- C. FortiGate always blocks all traffic after a route change.
- D. FortiGate flushes all routing information from the session table after a route change.
Answer: A,B
NEW QUESTION # 55
Refer to exhibits
Exhibit A shows the system interface with the static routes and exhibit B shows the firewall policies on the managed FortiGate Based on the FortiGate configuration shown in the exhibits, what are two issues you might encounter when creating an SD-WAN interface on port1 and port2? {Choose two )
- A. Member interfaces that are referenced by any other configuration element
- B. Member interface that have IP address of 0.0.0.0/0.0.0.0
- C. Member interfaces that are physical interfaces as well as VLAN aggregate, and iPsec interfaces
- D. Member interfaces that are administratively down
Answer: A,D
NEW QUESTION # 56
Refer to the exhibit.
Which conclusion about the packet debug flow output is correct?
- A. The original traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- B. The reply traffic exceeded the maximum bandwidth configured in the traffic shaper, and the packet was dropped.
- C. The original traffic exceeded the maximum packets per second of the outgoing interface, and the packet was dropped.
- D. The original traffic exceeded the maximum bandwidth of the outgoing interface, and the packet was dropped.
Answer: A
NEW QUESTION # 57
Which two benefits from using forward error correction (FEC) in IPsec VPNs are true? (Choose two.)
- A. FEC transmits the original payload in full to recover the error in transmission.
- B. FEC transmits additional packets as redundant data to the remote device.
- C. FEC reduces the stress on the remote device buffer to reconstruct packet loss.
- D. FEC improves reliability, which overcomes adverse WAN conditions such as noisy links.
Answer: B,D
NEW QUESTION # 58
Refer to the exhibit.
Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)
- A. Set priority 10.
- B. Set cost 15.
- C. Set load-balance-mode source-ip-ip-based.
- D. Set source 100.64.1.1.
Answer: D
NEW QUESTION # 59
Refer to exhibits.
Exhibit A.
Exhibit B.
Exhibit A shows the SD-WAN performance SLA and exhibit B shows the SO-WAN interface and the static routes configuration.
Port1 and port2 are member interfaces of the SD-WAN, and port2 becomes a dead member after reaching the failure thresholds Which statement about the dead member is correct?
- A. Dead members require manual administrator access to bring them back alive
- B. Port2 might become alive when a single response is received from an SLA server
- C. SD-WAN interface becomes disabled and port1 becomes the WAN interface
- D. Subnets 100 .64.1.0/23 and 172 . 20 . 0. 0/16 are reachable only through port1
Answer: D
NEW QUESTION # 60
Which statement reflects how BGP tags work with SD-WAN rules?
- A. BGP tags match the SD-WAN rule based on the order that these rules were installed.
- B. BGP tags require that the adding of static routes be enabled on all ADVPN interfaces
- C. Route tags are used for a BGP community and the SD-WAN rules are assigned the same tag
- D. VPN topologies are formed using only BGP dynamic routing with SD-WAN
Answer: A
NEW QUESTION # 61
Which two tasks about using central VPN management are true? (Choose two.)
- A. You must enable VPN zones for SD-WAN deployments.
- B. You configure VPN communities to define common IPsec settings shared by all VPN gateways.
- C. You can configure full mesh, star, and dial-up VPN topologies.
- D. FortiManager installs VPN settings on both managed and external gateways.
Answer: B,C
NEW QUESTION # 62
Refer to the exhibit.
Which statement about the command route-tag in the SD-WAN rule is true?
- A. It tags each route and references the tag in the routing table.
- B. It enables the SD-WAN rule to load balance and assign traffic with a route tag
- C. It ensures route tags match the SD-WAN rule based on the rule order
- D. It uses route tags for a BGP community and assigns the SD-WAN rules with same tag.
Answer: C
NEW QUESTION # 63
What are two roles that SD-WAN orchestrator plays when it works with FortiManager? (Choose two )
- A. It acts as an application that is released and signed by Fortinet to run as a part of management extensions on FortiManager.
- B. It acts as a hub FortiGate with an SD-WAN interface enabled and managed along with other FortiGate devices by FortiManager.
- C. It configures and monitors SD-WAN networks on FortiGate devices that are managed by FortiManager.
- D. It acts as a standalone device to assist FortiManager to manage SD-WAN interfaces on the managed FortiGate devices.
Answer: A,D
NEW QUESTION # 64
Refer to Exhibit:
Based on the exhibit, which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules, among the member interfaces?
- A. All traffic from a source IP is sent to the same interfaces.
- B. All traffic from a source IP to a destination IP is sent to the least used interface.
- C. All traffic from a source IP to a destination IP Is sent to the same interface.
- D. All traffic from a source IP Is sent to the most used Interface.
Answer: C
NEW QUESTION # 65
Which three performance SLA protocols are available on the FortiGate CLI only? (Choose three.)
- A. icmp
- B. udp-echo
- C. smtp
- D. tcp-echo
- E. twamp
Answer: B,D,E
Explanation:
Command output from a fortigate:
FW-01 (test-health-check) # set protocol
ping Use PING to test the link with the server.
tcp-echo Use TCP echo to test the link with the server.
udp-echo Use UDP echo to test the link with the server.
http Use HTTP-GET to test the link with the server.
twamp Use TWAMP to test the link with the server.
dns Use DNS query to test the link with the server.
tcp-connect Use a full TCP connection to test the link with the server.
ftp Use FTP to test the link with the server.
NEW QUESTION # 66
Which diagnostic command you can use to show interface-specific SLA logs for the last 10 minutes?
- A. diagnose sys virtual-wan-link log
- B. diagnose sys virtual-wan-link intf-sla-log
- C. diagnose sys virtual-wan-link health-check
- D. diagnose sys virtual-wan-link sla-log
Answer: D
NEW QUESTION # 67
......
Pass Your Fortinet Exam with NSE7_SDW-6.4 Exam Dumps: https://www.actualcollection.com/NSE7_SDW-6.4-exam-questions.html