[Oct-2021] Updated Microsoft 365 MS-500 Exam Questions BUNDLE PACK
Master The Microsoft Content MS-500 EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 90
You have a Microsoft 365 subscription.
You identify the following data loss prevention (DLP) requirements:
* Send notifications to users if they attempt to send attachments that contain EU social security numbers
* Prevent any email messages that contain credit card numbers from being sent outside your organization
* Block the external sharing of Microsoft OneDrive content that contains EU passport numbers
* Send administrators email alerts if any rule matches occur.
What is the minimum number of DLP policies and rules you must create to meet the requirements? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 91
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: #HSP.ug?$p6un
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11122308
You need to ensure that a user named Allan Deyoung can perform searches and place holds on mailboxes, SharePoint Online sites, and OneDrive for Business locations. The solution must use the principle of least privilege.
To complete this task, sign in to the Microsoft 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
* After signing in to the Microsoft 365 admin center, navigate to the Security & Compliance Center.
* In the left pane of the security and compliance center, select Permissions, and then select the checkbox next to eDiscovery Manager.
* On the eDiscovery Manager flyout page, do one of the following based on the eDiscovery permissions that you want to assign.
To make a user an eDiscovery Manager: Next to eDiscovery Manager, select Edit. In the Choose eDiscovery Manager section, select the Choose eDiscovery Manager hyperlink, and then select + Add.
Select the user (or users) you want to add as an eDiscovery manager, and then select Add. When you're finished adding users, select Done. Then, on the Editing Choose eDiscovery Manager flyout page, select Save to save the changes to the eDiscovery Manager membership.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/assign-ediscovery-permissions?view=o365-worldwi
NEW QUESTION 92
You have a hybrid deployment of Microsoft 365 that contains the users shown in the following table.
You plan to use Microsoft 365 Attack Simulator.
You need to identify the users against which you can use Attack Simulator.
Which users should you identify?
- A. User3 and User4 only
- B. User3 only
- C. User1, User2, User3, and User4
- D. User1 and User3 only
Answer: A
NEW QUESTION 93
You have a Microsoft 365 subscription that uses an Azure Active Directory (Azure AD) tenant named contoso.com. OneDrive stores files that are shared with external users. The files are configured as shown in the following table.
You create a data loss prevention (DLP) policy that applies to the content stored in OneDrive accounts. The policy contains the following three rules:
* Rulel:
* Conditions: Label 1, Detect content that's shared with people outside my organization
* Actions: Restrict access to the content for external users
* User notifications: Notify the user who last modified the content
* User overrides: On
* Priority: 0
* Rule2:
* Conditions: Label 1 or Label2
* Actions: Restrict access to the content
* Priority: 1
* Rule3:
* Conditions: Label2, Detect content that's shared with people outside my organization
* Actions: Restrict access to the content for external users
* User notifications: Notify the user who last modified the content
* User overrides: On
* Priority: 2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 94
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription.
You have a user named User1. Several users have full access to the mailbox of User1.
Some email messages sent to User1 appear to have been read and deleted before the user viewed them.
When you search the audit log in Security & Compliance to identify who signed in to the mailbox of User1, the results are blank.
You need to ensure that you can view future sign-ins to the mailbox of User1.
You run the Set-AdminAuditLogConfig -AdminAuditLogEnabled $true
-AdminAuditLogCmdlets *Mailbox* command.
Does that meet the goal?
- A. No
- B. Yes
Answer: A
Explanation:
References:
https://docs.microsoft.com/en-us/powershell/module/exchange/policy-and-compliance-audit/setadminauditlogconfig?view=exchange-ps
NEW QUESTION 95
You have a Microsoft 365 subscription that uses a default name of litwareinc.com.
You configure the Sharing settings in Microsoft OneDrive as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/onedrive/manage-sharing
NEW QUESTION 96
You have a Microsoft 365 subscription.
You are creating a retention policy named Retention1 as shown in the following exhibit.
You apply Retention1 to SharePoint sites and OneDrive accounts.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 97
Your company has a main office and a Microsoft 365 subscription.
You need to enforce Microsoft Azure Multi-Factor Authentication (MFA) by using conditional access for all users who are NOT physically present in the office.
What should you include in the configuration?
- A. an Azure MFA Server
- B. a user risk policy
- C. a sign-in risk policy
- D. a named location in Azure Active Directory (Azure AD)
Answer: D
Explanation:
References:
https://docs.microsoft.com/en-us/azure/active-directory/conditional-access/location-condition
NEW QUESTION 98
You create a data loss prevention (DLP) policy as shown in the following shown:
What is the effect of the policy when a user attempts to send an email messages that contains sensitive information?
- A. The email message is sent without a notification
- B. The user receives a notification and can send the email message
- C. The user receives a notification and cannot send the email message
- D. The email message is blocked silently
Answer: B
Explanation:
Explanation
https://docs.microsoft.com/en-us/office365/securitycompliance/data-loss-prevention-policies
NEW QUESTION 99
You have a Microsoft 365 subscription.
You create an Advanced Threat Protection (ATP) safe attachments policy to quarantine malware.
You need to configure the retention duration for the attachments in quarantine.
Which type of threat management policy should you create from the Security&Compliance admin center?
- A. Anti-malware
- B. DKIM
- C. ATP anti-phishing
- D. Anti-spam
Answer: A
NEW QUESTION 100
You have a Microsoft 365 subscription.
All users are assigned a Microsoft 365 E5 license.
How long will auditing data be retained?
- A. 90 days
- B. 365 days
- C. 5 years
- D. 30 days
Answer: A
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/search-the-audit-log-in-security-and-compliance
NEW QUESTION 101
Which role should you assign to User1?
- A. Privileged role administrator
- B. Global administrator
- C. User administrator
- D. Security administrator
https://docs.microsoft.com/en-us/azure/active-directory/privileged-identity-management/pim-how-to-give-access-to-pim
Answer: D
NEW QUESTION 102
You plan to configure an access review to meet the security requirements for the workload administrators. You create an access review policy and specify the scope and a group.
Which other settings should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 103
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains the users shown in the following table.
You discover that all the users in the subscription can access Compliance Manager reports.
The Compliance Manager Reader role is not assigned to any users.
You need to recommend a solution to prevent a user named User5 from accessing the Compliance Manager reports.
Solution: You recommend assigning the Compliance Manager Reader role to User5.
Does this meet the goal?
- A. No
- B. Yes
Answer: A
NEW QUESTION 104
Your network contains an Active Directory domain named contoso.com. The domain contains a VPN server named VPN1 that runs Windows Server 2016 and has the Remote Access server role installed.
You have a Microsoft Azure subscription.
You are deploying Azure Advanced Threat Protection (ATP)
You install an Azure ATP standalone sensor on a server named Server1 that runs Windows Server 2016.
You need to integrate the VPN and Azure ATP.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure-advanced-threat-protection/install-atp-step6-vpn
NEW QUESTION 105
You plan to add a file named ConfidentialHR.docx to a Microsoft SharePoint library.
You need to ensure that a user named Megan Bowen is notified when another user accesses ConfidentialHR.xlsx.
To complete this task, sign in to the Microsoft 365 portal.
Answer:
Explanation:
See explanation below.
Explanation
You need to configure an alert policy.
* Go to the Security & Compliance Admin Center.
* Navigate to Alerts > Alert Policies.
* Click on + New alert policy to create a new policy.
* Give the policy a name and select a severity level. For example: Medium.
* In the Category section, select Information Governance and click Next.
* In the Select an activity section, select Any file or folder activity.
* Click Add a condition and select File name.
* Type in the filename ConfidentialHR.xlsx and click Next.
* In the email recipients section, add Megan Bowen and click
* Click Finish to create the alert policy.
NEW QUESTION 106
You have a Microsoft 365 subscription that include three users named User1, User2, and User3.
A file named File1.docx is stored in Microsoft OneDrive. An automated process updates File1.docx every minute.
You create an alert policy named Policy1 as shown in the following exhibit.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/alert-policies
NEW QUESTION 107
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 subscription that contains 1,000 user mailboxes.
An administrator named Admin1 must be able to search for the name of a competing company in the mailbox of a user named User5.
You need to ensure that Admin1 can search the mailbox of User5 successfully. The solution must prevent Admin1 from sending email messages as User5.
Solution: You assign the eDiscovery Manager role to Admin1, and then create an eDiscovery case.
Does this meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/exchange/policy-and-compliance/ediscovery/ediscovery?view=exchserver-
2019
NEW QUESTION 108
You have an Azure Sentinel workspace that has an Azure Active Directory (Azure AD) connector and a Microsoft Office 365 connector.
You need to assign built-in role-based access control (RBAC) roles to achieve the following tasks:
Create and run playbooks.
Manage incidents.
The solution must use the principle of least privilege.
Which two roles should you assign? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Azure Sentinel contributor
- B. Automation Runbook Operator
- C. Automation Operator
- D. Logic App contributor
- E. Azure Sentinel responder
Answer: A,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/sentinel/roles
NEW QUESTION 109
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Microsoft 365 tenant. You create a label named CompanyConfidential in Microsoft Azure Information Protection.
You add CompanyConfidential to a global policy.
A user protects an email message by using CompanyConfidential and sends the label to several external recipients. The external recipients report that they cannot open the email message.
You need to ensure that the external recipients can open protected email messages sent to them.
You create a new label in the global policy and instruct the user to resend the email message.
Does that meet the goal?
- A. No
- B. Yes
Answer: B
NEW QUESTION 110
......
Pass Microsoft MS-500 Exam – Experts Are Here To Help You: https://www.actualcollection.com/MS-500-exam-questions.html